Potty ME4413

Potty ME4413

This topic has 4 replies, 4 voices, and was last updated 25 September 2011 at 19:52 by Stewart Hart.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
25 September 2011 at 10:45 #75376
Eric Cox
Participant
@ericcox50497
In ME4413, page 443 drawing 4 there appears to be an angular dimension on the cylinder block section A-A. It looks like 150t, what is it.
Advert

25 September 2011 at 10:45 #5669
Eric Cox
Participant
@ericcox50497
25 September 2011 at 11:24 #75380
KWIL
Participant
@kwil
If you look at the other dimensions of the block and cylinder, the centerline of the cylinder is 20mm from the bottom face, the cylinder diameter overall is 26mm and hence the top edge of the cylinder is 20 +13 = 33mm. The overall height is 48mm, subtract 33mm remainder is 15mm so 150t should read 15.0 !!

Edited By KWIL on 25/09/2011 11:25:27
25 September 2011 at 11:57 #75383
JasonB
Moderator
@jasonb
No it should read 15 degrees, another cast of not checking the scanned in image, here is a snip from Stew’s original drawing

Sorry its not that clear but you can definatly see its 15 degrees, its a lot clearer if you look in my album, the mag software is blowing it up too much

J

Edited By JasonB on 25/09/2011 12:01:22
25 September 2011 at 19:52 #75402
Stewart Hart
Participant
@stewarthart90345
Jason has got it correct it should be 15 deg, I did notice in my copy of the mag that it was a bit unclear.

Any other ? please don’t hesitate to ask, or send me a PM

Stew
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Hallo from Austria
  Started by: wilfried54 in: Introduce Yourself – New members start here!
- 2
- 3
- 6 July 2026 at 15:27
  wilfried54
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 5
- 5
- 6 July 2026 at 13:59
  bernard towers
- Valuatiion of severql models
  Started by: ron vale 3 in: Stationary engines
- 2
- 2
- 6 July 2026 at 13:56
  bernard towers
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 4
- 5
- 6 July 2026 at 13:28
  John Haine
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 69
- 6 July 2026 at 13:09
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 12
- 14
- 6 July 2026 at 12:44
  Martin Johnson 1
- Jaxon Steam Car ride to the next 5 inch rail club
  Started by: Werner Schleidt in: Traction engines
- 4
- 4
- 6 July 2026 at 12:18
  Weary
- Hi there fellow engineers
  Started by: ray1580 in: Introduce Yourself – New members start here!
- 5
- 8
- 6 July 2026 at 11:45
  alecs
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 32
- 61
- 6 July 2026 at 10:36
  alecs
- Unwanted Car Software Update 1 2
  Started by: Chris Crew in: The Tea Room
- 19
- 28
- 6 July 2026 at 10:29
  John Haine
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 60
- 6 July 2026 at 08:29
  alecs
- Accolade
  Started by: Bill Dawes in: General Questions
- 8
- 8
- 6 July 2026 at 00:18
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 119
- 6 July 2026 at 00:13
  Nigel Graham 2
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 16
- 33
- 5 July 2026 at 21:54
  Vic
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 10
- 5 July 2026 at 20:43
  Dougie Swan
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 6
- 9
- 3 July 2026 at 22:23
  Mark Rand

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies