Can anyone identify these castings.

Can anyone identify these castings.

This topic has 4 replies, 3 voices, and was last updated 6 August 2017 at 00:45 by Paul Lousick.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
5 August 2017 at 19:37 #310575
Maurice Cox 1
Participant
@mauricecox1
I am helping to clear the workshop of a friend who died a little while ago. I have found the castings shown in the pictures. There are six altogether, three with the cylindrical projection and three without. The hollow cylindrical portion is 15/16" diameter, with a bore of 3/4". The parallel part is 1 7/8" long. The part that closes the end is 1 5/8" diameter 5/32" thick. The projection on three of them is 1/2" diameter and 7/16" long. They have a very smooth finish and seem too good to discard or mutilate without trying tom find out what they are. Any suggestions please?

Edited By JasonB on 05/08/2017 19:42:18
Advert

5 August 2017 at 19:37 #25417
Maurice Cox 1
Participant
@mauricecox1
5 August 2017 at 20:10 #310584
Brian H
Participant
@brianh50089
Locomotive buffers?

Brian
5 August 2017 at 22:27 #310603
Maurice Cox 1
Participant
@mauricecox1
I thought this at first glance and from a distance, but hollow cast iron buffers seem unlikely. If the quality of the iron matches the obvious care with which they were made, I think they would be a nice source of cylinder liners.
6 August 2017 at 00:45 #310623
Paul Lousick
Participant
@paullousick59116
Is the hollow center for making them spring mounted ?
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- A chemistry question
  Started by: duncan webster 1 in: The Tea Room
- 3
- 4
- 7 August 2026 at 23:00
  duncan webster 1
- Tools you hate using or just don’t get on with?
  Started by: Hollowpoint in: General Questions
- 12
- 14
- 7 August 2026 at 22:48
  Bill Phinn
- SUSWE SU600A-2R2G1-B right mess
  Started by: tatler in: Electronics in the Workshop
- 5
- 9
- 7 August 2026 at 21:44
  Bazyle
- The tea room
  Started by: larry phelan 1 in: General Questions
- 2
- 2
- 7 August 2026 at 21:37
  Cornish Jack
- What the hell is going on with the suppliers??? 1 2
  Started by: Hollowpoint in: General Questions
- 19
- 33
- 7 August 2026 at 21:05
  ANDY CAWLEY
- Denford VMC 1300 CNC milling machine
  Started by: zoomer in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 4
- 4
- 7 August 2026 at 18:42
  John Haine
- 2 BA steel nuts
  Started by: vintagengineer in: Materials
- 1
- 1
- 7 August 2026 at 18:18
  vintagengineer
- Sealed Lead-Acid Battery 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 9
- 30
- 7 August 2026 at 17:31
  Michael Gilligan
- VFD size
  Started by: vintagengineer in: Electronics in the Workshop
- 5
- 6
- 7 August 2026 at 11:52
  Fulmen
- Sieg X3 Mill Toothed Belt
  Started by: Keith Rogers 2 in: Help and Assistance! (Offered or Wanted)
- 4
- 9
- 7 August 2026 at 11:10
  Keith Rogers 2
- Attempt to fix, or re-purpose, or just scrap?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 14
- 20
- 7 August 2026 at 09:02
  Hollowpoint
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 33
- 7 August 2026 at 08:03
  SteveP
- Stuart Beam Piston
  Started by: Chris Taylor 3 in: Beginners questions
- 3
- 4
- 7 August 2026 at 06:51
  JasonB
- Carbide tip choice advice info
  Started by: JohnF in: Workshop Tools and Tooling
- 11
- 12
- 6 August 2026 at 23:55
  Vic
- Clarke 0.50HP 2800 rpm motor behaving oddly.
  Started by: Andrew Tinsley in: General Questions
- 9
- 17
- 6 August 2026 at 21:00
  Andrew Tinsley
- 3/16 x 30
  Started by: Peter Howell 1 in: Workshop Tools and Tooling
- 8
- 14
- 6 August 2026 at 15:22
  Roderick Jenkins
- J style indicator holders
  Started by: BOB BLACKSHAW 1 in: General Questions
- 11
- 20
- 6 August 2026 at 14:24
  DC31k
- Mystery debris? 1 2
  Started by: Bo’sun in: The Tea Room
- 15
- 27
- 6 August 2026 at 10:20
  Bo’sun
- It’s A Compressor, Jim, But Not… 1 2 3
  Started by: Nigel Graham 2 in: General Questions
- 15
- 51
- 5 August 2026 at 23:05
  Michael Gilligan
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 13
- 5 August 2026 at 12:58
  Martin Johnson 1
- Farm Boy 1 2 … 4 5
  Started by: Dalboy in: I/C Engines
- 17
- 119
- 5 August 2026 at 12:39
  Dalboy
- Marv Klotz Calculators for Model Engineers
  Started by: David Banham 1 in: Workshop Techniques
- 7
- 13
- 5 August 2026 at 11:41
  southernchap
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 80
- 4 August 2026 at 22:23
  John Hinkley
- Roughing End Mills
  Started by: Colin Teasdale in: Beginners questions
- 8
- 17
- 4 August 2026 at 17:06
  Mark Rand
- Plug & Play controller for a milling machine
  Started by: mhudd500 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 3
- 4 August 2026 at 13:28
  John Haine

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies