UK company supplying knobs, handles etc?

This topic has 14 replies, 12 voices, and was last updated 15 July 2017 at 14:39 by John Gardener.

Viewing 15 posts - 1 through 15 (of 15 total)

Author

Posts
14 July 2017 at 21:44 #25367
Andrew Tinsley
Participant
@andrewtinsley63637
Advert

14 July 2017 at 21:44 #307161
Andrew Tinsley
Participant
@andrewtinsley63637
I thought I had bookmarked this web site, but it isn't in my list! So can anyone tell me who this company is? They supply a load of other hard to get bits and pieces as well as knobs and handles.

Thanks,

Andrew.
14 July 2017 at 21:50 #307164
Andrew Entwistle
Participant
@andrewentwistle
Hi Andrew, could it be Wixroyd **LINK** or WDS **LINK** ?

Andrew.
14 July 2017 at 21:52 #307165
Andrew Entwistle
Participant
@andrewentwistle
Or Essentra http://www.essentracomponents.com/en-gb

Edited By Andrew Entwistle on 14/07/2017 21:55:27
14 July 2017 at 23:12 #307179
Keith Long
Participant
@keithlong89920
Also worth looking at Berger tools http://www.berger-tools.co.uk/

Edited By Keith Long on 14/07/2017 23:13:11

Edited By Keith Long on 14/07/2017 23:13:49
15 July 2017 at 08:18 #307193
Neil Wyatt
Moderator
@neilwyatt
For handles and other box–building bits, google for 'flight case components', no good for knobs though.

Neil
15 July 2017 at 08:57 #307199
Chris Evans 6
Participant
@chrisevans6
I use WDS if in a hurry. Import from China via Ebay if not and I've got my stingy head on.
15 July 2017 at 09:48 #307204
Andrew Tinsley
Participant
@andrewtinsley63637
Thanks everyone.

Strangely enough none of the suggestions is the company that I found (and then lost!). However the suggestions will certainly source my needs.

Thanks again,

Andrew.
15 July 2017 at 10:34 #307210
Nick Hughes
Participant
@nickhughes97026
Company I work for use :- **LINK**

Nick.
15 July 2017 at 10:42 #307211
Geoff Theasby
Participant
@geofftheasby
Norelem have a HUGE catalogue of Standard Parts.

Geoff
15 July 2017 at 10:47 #307214
not done it yet
Participant
@notdoneityet
RS. Or whatever name they use these days?
15 July 2017 at 11:21 #307220
Keith Rogers 2
Participant
@keithrogers2
I used to use Alexander Industrial Supplies,

but they seem to have been taken over by http://www.essentracomponents.com/en-gb

as suggested by Andrew Entwistle.

Keith.
15 July 2017 at 11:45 #307223
AndyP
Participant
@andyp13730
I have used Boneham and Turner and been happy.

Andy
15 July 2017 at 12:04 #307227
Clive Foster
Participant
@clivefoster55965
Banbury Plastic Fittings **LINK** came up trumps for me when I needed a slightly unusual sized knob with threaded stem for a Creusen grinder tool rest. Other folk had too big or too small. Decent range of handles, hinges, cable management and other stuff.

Clive.
15 July 2017 at 14:39 #307255
John Gardener
Participant
@johngardener91897
I have used this company

**LINK**

Not the cheapest but good quality.

No connection, just a satisfied customer.
Author

Posts