Gib Strib greasing holes?

This topic has 1 reply, 1 voice, and was last updated 17 August 2016 at 19:31 by Viv Watts.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
17 August 2016 at 19:31 #24690
Viv Watts
Participant
@vivwatts
Advert

17 August 2016 at 19:31 #251172
Viv Watts
Participant
@vivwatts
Hi all,

I'm in the process of fitting anti-backlash nuts to Myford VMB mill. I have made additional nuts from phosphor bronze (difficult stuff to machine I found).

On re-assembly it occured to me that on the sides of the dovetail slide ways that have a gib strip, the creasing point will inject crease behind the gib strip. Some might flow around it but not much.

Would you expect a hole in the gib strip to line up with the greasing nipple. If so how to prevent grease still just spreading out behing the gib strip and not getting on the bearing surfaces?

Thanks
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Why righthand threads? 1 2
  Started by: vintagengineer in: General Questions
- 20
- 28
- 29 July 2026 at 14:52
  Mick B1
- AVG;BEWARE!
  Started by: Howard Lewis in: The Tea Room
- 1
- 1
- 29 July 2026 at 13:30
  Howard Lewis
- Hello from EastAnglia
  Started by: 1southdrive in: Introduce Yourself – New members start here!
- 6
- 6
- 29 July 2026 at 13:08
  Howard Lewis
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 7
- 9
- 29 July 2026 at 12:50
  Martin Johnson 1
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 10
- 19
- 29 July 2026 at 12:29
  ega
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 235
- 29 July 2026 at 09:56
  Lex Davis
- Sealed Lead-Acid Battery
  Started by: Michael Gilligan in: Electronics in the Workshop
- 5
- 19
- 29 July 2026 at 00:14
  Michael Gilligan
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 15
- 48
- 28 July 2026 at 23:26
  Nigel Graham 2
- blackgates eng 1 2
  Started by: Peter Daw in: Beginners questions
- 22
- 38
- 28 July 2026 at 22:39
  Stuart Smith 5
- Basic(?) Milling question
  Started by: paulmichael1084 in: Beginners questions
- 10
- 16
- 28 July 2026 at 21:15
  Julie Ann
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 4
- 9
- 28 July 2026 at 16:58
  Michael Gilligan
- Boiler explosion on Guadeloupe.
  Started by: howardb in: The Tea Room
- 6
- 10
- 28 July 2026 at 13:17
  JasonB
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 20
- 94
- 28 July 2026 at 10:31
  paulmichael1084
- Garden water pump
  Started by: John MC in: The Tea Room
- 12
- 22
- 28 July 2026 at 09:42
  noel shelley
- Latest new addon for FreeCAD!!
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 2
- 5
- 28 July 2026 at 08:51
  Russell Eberhardt
- Silver Soldering
  Started by: Jss in: General Questions
- 11
- 18
- 27 July 2026 at 23:36
  duncan webster 1
- Bengs kits
  Started by: paul1956 in: Beginners questions
- 5
- 8
- 27 July 2026 at 17:37
  duncan webster 1
- New motor for a Myford super 7
  Started by: Hollowpoint in: Electronics in the Workshop
- 12
- 16
- 27 July 2026 at 17:29
  john fletcher 1
- chester conquest pcb board connections
  Started by: In Wilson in: Introduce Yourself – New members start here!
- 6
- 15
- 27 July 2026 at 13:35
  Hugh Stewart-Smith 1
- Peat-Shaped [ ref. Verdict DTI ]
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 1
- 1
- 27 July 2026 at 12:40
  Michael Gilligan
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 28
- 94
- 27 July 2026 at 09:27
  not done it yet
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 19
- 27 July 2026 at 06:29
  Peter Hoerlein
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 7
- 15
- 27 July 2026 at 00:45
  Blue Heeler
- Long awaited FreeCAD version 1.1 released
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 3
- 9
- 26 July 2026 at 15:36
  Russell Eberhardt
- Looking for detailed build logs to help decide next project
  Started by: GrahamS in: Stationary engines
- 4
- 8
- 26 July 2026 at 10:57
  GrahamS

Gib Strib greasing holes?

Gib Strib greasing holes?

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies