If I were taking on such a task, I would want at least a bridgeport size.

keep us posted on progress

Shaun

Assuming you buy in the frames laser cut it ought to be possible to handle the work on the larger dovetail column bench machines such one of the sub Bridgeport size hobby knee mills. Using the Chester site as convenient reference the Lux, Super Lux, 626, 830 VS or 830 VS-R are possible candidates. Other suppliers have similar options. Some creativity in mounting larger components may be needed and, possibly, taking two bites to cover a surface when you'd rather do it in one hit. Y-axis travel is usually a limitation with this class of machine. Dovetail column machines in particular generally only have enough Y travel for the spindle centre line to cover about 3/4 of the table Y depth. The 830 VS-R, with its scaled down round ram Bridgeport configuration scores here due to the ability to adjust the head in the Y plane. There is also an attractive scaled down Bridgeport dovetail ram machine around which is probably a good choice if you don't have room for a Bridgeport.

Of course the prices of such machines are up in good used Bridgeport territory so if you can fit it in its the obvious machine to go for. I went from a short table Lux to a 49" table Bridgeport and the extra space made life unbelievably easier. In theory pretty much everything I voluntarily do could be fitted into the working envelope of the old Lux but most would have been something of a battle. No getting away from the fact that mills and milling jobs tend to sprawl. Its probably not unfair to say that if the work envelope you intend to use is X by Y by Z its desirable to have 3X by 2Y by 1 1/2 Z of space available. Then there is the extra Z needed for tool changes, switching from drills in chuck to milling cutters in collets ect ect. There is a darn good reasons why a Bridgeport is considered about the minimum for general purpose 12" to the foot scale work. Another point in favour of professional market rather than hobby market machine of these sizes is the extra durability and refinements required by a machine that has to earn its living in full time work. Hobby market machines are inevitably price constrained and, with the best will in the world, most hobby buyers have to accept limitations if the new machine price is to be in reach.

Really you have to do your homework when going below Bridgeport size for these big models. Perfectly possible to manage with a well chosen smaller machine but with the number of parts involved there is much to be said for making life easy.

Clive.

Buy my Harrison. You would be my wife's best friend and I would be pretty happy too. Dro fitted😉

Bri

Ralph, interested in your build. Just start to budget for patterns !!