Is this any good to anyone.?

Is this any good to anyone.?

This topic has 7 replies, 6 voices, and was last updated 18 August 2015 at 14:53 by Nick_G.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
18 August 2015 at 11:48 #200882
Nick_G
Participant
@nick_g
.

Again a freebie but you will have to collect from Warrington.

This was a heated press that was used to heat seal laminates and photographs onto canvass.

It 'had' on it 2 nice plates of some kind of alloy measuring 27" x 22" x 1" and this is the reason I offered to scrap it and I have 'snaffled' these plates for moi.

(No idea what alloy they are but they are not magnetic and far too heavy for just plain ali.)

Anyway. The rest is up for grabs to anyone who may have a use for it. Either to make another press of some kind or to chop up and use.

It's probably now just scrap unless someone has a need / use for it.

Nick
Advert

18 August 2015 at 11:48 #24044
Nick_G
Participant
@nick_g
18 August 2015 at 11:54 #200884
Michael Gilligan
Participant
@michaelgilligan61133
If only I had the room for it, Nick.

MichaelG.
18 August 2015 at 12:01 #200885
David Clark 13
Participant
@davidclark13
It would make a good basis for an injection moulder.
18 August 2015 at 13:15 #200902
JasonB
Moderator
@jasonb
Or rivit squeezer
18 August 2015 at 13:26 #200903
John Stevenson 1
Participant
@johnstevenson1
Should appeal to any Yorkshireman………………………………
18 August 2015 at 13:52 #200906
V8Eng
Participant
@v8eng
Bit risky crossing the border, have to change the colour of the buttonhole rose.

Oops I forgot they moved Warrington into Cheshire!

Edited By V8Eng on 18/08/2015 13:57:49

My Yorkshire ancestors were not tight either.

Edited By V8Eng on 18/08/2015 14:04:01
18 August 2015 at 14:53 #200914
Nick_G
Participant
@nick_g
Posted by JasonB on 18/08/2015 13:15:53:

Or rivit squeezer

.

Pervert.!!!!

I knew I was right to have my doubts about you.!

Nick
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 42
- 149
- 22 July 2026 at 19:20
  bernard towers
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 2
- 22 July 2026 at 18:56
  Peter Cook 6
- It’s A Compressor, Jim, But Not…
  Started by: Nigel Graham 2 in: General Questions
- 9
- 18
- 22 July 2026 at 18:52
  duncan webster 1
- Is anyone interested in developping a new series of model engines? 1 2 3
  Started by: paulmichael1084 in: General Questions
- 17
- 59
- 22 July 2026 at 18:09
  JA
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 21
- 22 July 2026 at 17:19
  Bazyle
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 2
- 2
- 22 July 2026 at 16:21
  Nick Hughes
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 72
- 22 July 2026 at 16:11
  tomcnc
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers
- Unusual Crawford Collets and where to test them
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 13:32
  Rainbows
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 8
- 22 July 2026 at 11:40
  bernard towers
- Panasonic Hard Disk Recorder
  Started by: Michael Gilligan in: Electronics in the Workshop
- 1
- 1
- 21 July 2026 at 22:48
  Michael Gilligan
- Using an emergency collet
  Started by: Dell in: Workshop Tools and Tooling
- 8
- 17
- 21 July 2026 at 15:13
  Dell
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 12
- 21 July 2026 at 10:46
  duncan webster 1
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 6
- 10
- 21 July 2026 at 10:34
  Julie Ann
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 13
- 31
- 20 July 2026 at 23:54
  Bill Phinn
- Cormak TU2807v gearing issues
  Started by: paul_go in: General Questions
- 2
- 7
- 20 July 2026 at 21:14
  paul_go
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 37
- 20 July 2026 at 17:02
  ega
- Band saw 1 2 3 4
  Started by: Peter Simpson 3 in: Beginners questions
- 25
- 82
- 20 July 2026 at 16:55
  ega
- Gents C7 electric master clock
  Started by: Robert Atkinson 2 in: Clocks and Scientific Instruments
- 5
- 12
- 20 July 2026 at 16:44
  John Haine
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 7
- 17
- 20 July 2026 at 14:30
  Journeyman
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 67
- 20 July 2026 at 09:00
  dean clarke 2
- Steam Loco component interconnection diagram
  Started by: Trevor Wood 6 in: Beginners questions
- 5
- 8
- 19 July 2026 at 23:57
  Nigel Graham 2
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 9
- 19 July 2026 at 13:12
  Roderick Jenkins
- New comer
  Started by: vgvikram171 in: Introduce Yourself – New members start here!
- 1
- 1
- 18 July 2026 at 20:43
  vgvikram171

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies