Colchester Hepworth hydraulic copy profiler on the Triumph 2000

Colchester Hepworth hydraulic copy profiler on the Triumph 2000

This topic has 1 reply, 1 voice, and was last updated 17 October 2017 at 13:11 by O Harvey.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
17 October 2017 at 13:11 #18701
O Harvey
Participant
@oharvey50369
Advert

17 October 2017 at 13:11 #321934
O Harvey
Participant
@oharvey50369
Hello all,

Whilst researching the Colchester-Hepworth copy attachment that came with my lathe I noticed that several members are familiar with this lathe and profiler. Although the lathe and profiler came together there is no sign of a mounting plate to clamp the attachment to the cross slide, although the underside of the profiler does have some witness marks from the plate that used to be attached to it.

It is a long shot, but does anyone know where I may be able to buy the factory mount?

Maybe someone on the forum would accept the commission to make one? I have no access to a milling machine at the moment, unfortunately. The plate has a simple rectangular hole pattern of four holes and a pair of male V blocks which clamp into the V slots on the sides of the cross slide.

Very much hoping that somebody can help me out with this.

Best regards,

OJ
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Quiet angle grinder 1 2
  Started by: Sonic Escape in: General Questions
- 19
- 28
- 7 June 2025 at 19:11
  Robert Atkinson 2
- 30w low voltage PWM controller
  Started by: Michael Gilligan in: Electronics in the Workshop
- 6
- 12
- 7 June 2025 at 18:36
  Robert Atkinson 2
- Unusual Crow Bar Type Tool? Fire Brigade?
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 8
- 10
- 7 June 2025 at 18:20
  duncan webster 1
- Boiler Design – issue 4765 1 2 … 6 7
  Started by: Charles Lamont in: Model Engineer & Workshop
- 24
- 163
- 7 June 2025 at 18:14
  duncan webster 1
- Cheap rust removing solution
  Started by: Sonic Escape in: The Tea Room
- 1
- 1
- 7 June 2025 at 18:09
  Sonic Escape
- Anti Virus software
  Started by: Andrew Crow in: The Tea Room
- 14
- 17
- 7 June 2025 at 17:54
  old mart
- Need help choosing a lathe chuck
  Started by: th1980 in: Workshop Tools and Tooling
- 15
- 19
- 7 June 2025 at 17:53
  th1980
- First lathe – warco 180/210
  Started by: Chris12 in: Beginners questions
- 8
- 13
- 7 June 2025 at 17:18
  Nick Wheeler
- Adept shapers
  Started by: DMB in: Workshop Tools and Tooling
- 5
- 6
- 7 June 2025 at 16:30
  Frank Gorse
- Chester Champion mill 3 phase questions
  Started by: martian in: Electronics in the Workshop
- 3
- 3
- 7 June 2025 at 15:02
  Julie Ann
- A Tower Clock project 1 2
  Started by: Peter Cook 6 in: Clocks and Scientific Instruments
- 10
- 42
- 7 June 2025 at 13:13
  bernard towers
- Model dynamo drawings
  Started by: Dougie Swan in: General Questions
- 6
- 19
- 7 June 2025 at 12:51
  Dougie Swan
- Work Surface Free of Charge
  Started by: Martin Dilly 2 in: General Questions
- 1
- 1
- 7 June 2025 at 12:27
  Martin Dilly 2
- Plain bearing play
  Started by: Sonic Escape in: Beginners questions
- 5
- 8
- 7 June 2025 at 10:07
  bernard towers
- ME beam engine 1 2
  Started by: Jager in: Stationary engines
- 11
- 28
- 7 June 2025 at 10:06
  JasonB
- Lathe spindle bearings
  Started by: Sonic Escape in: Beginners questions
- 10
- 21
- 7 June 2025 at 09:20
  jamesp1
- Parkson M1200 milling machine
  Started by: simon88 in: Manual machine tools
- 1
- 1
- 6 June 2025 at 19:12
  simon88
- Kelsey Media buys Mortons titles 1 2 3
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 23
- 73
- 6 June 2025 at 19:00
  SillyOldDuffer
- Comm Ads
  Started by: bernard towers in: Website Questions, Comments, and Suggestions
- 3
- 13
- 6 June 2025 at 18:25
  JasonB
- LBSC – Why?
  Started by: Speedy Builder5 in: Locomotives
- 3
- 4
- 6 June 2025 at 17:48
  Speedy Builder5
- 4 Truck Shay 5 inch
  Started by: conrod in: Work In Progress and completed items
- 6
- 17
- 6 June 2025 at 16:41
  old mart
- New member, progress no.1 rest
  Started by: flyingsailor in: Introduce Yourself – New members start here!
- 5
- 6
- 6 June 2025 at 13:36
  jamesp1
- Aluminium MIG wire
  Started by: Speedy Builder5 in: Materials
- 5
- 8
- 6 June 2025 at 11:18
  noel shelley
- Motorcycle starter motors – any general workshop uses?
  Started by: Robin Graham in: Beginners questions
- 8
- 9
- 6 June 2025 at 09:58
  JasonB
- crompton motor and dewhurst switch problems
  Started by: mike smith 5 in: Beginners questions
- 2
- 3
- 5 June 2025 at 23:37
  petejchadwick@gmail.com

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

June 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies