Sieg KX3 Spindle running backwards

This topic has 2 replies, 2 voices, and was last updated 21 January 2018 at 17:54 by Ketan Swali.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
21 January 2018 at 12:00 #337667
Peter Bell
Participant
@peterbell11509
Got my UC-100 parallel adapter successfully connected and reinstalled Mach 3 on my new computer and the machine works again, phew!

However the motor spindle is running backwards, been through the setup and cannot change the direction—has any other Sieg owner had the same problem after a reinstallation?

Peter
Advert

21 January 2018 at 12:00 #15173
Peter Bell
Participant
@peterbell11509
21 January 2018 at 17:54 #337716
Ketan Swali
Participant
@ketanswali79440
Hi Peter,

Have a look at this link:

**LINK**

A few months before JS passed away, he, I and Adam (Johns son) decided to turn most of the areas of the smallcncsupport forum (dedicated to SIEG KX-Mach mills) into an open forum. Adam provided this link. Hope this helps.

Ketan at ARC
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- An extraordinary lathe bargain?
  Started by: Robin Graham in: The Tea Room
- 4
- 4
- 9 June 2026 at 07:07
  jimmy b
- Myford VMC Spindle Advice Please.
  Started by: Nigel Graham 2 in: Manual machine tools
- 7
- 15
- 9 June 2026 at 00:09
  Nigel Graham 2
- Breaking gears in a Myford ML7
  Started by: drnewcomb in: Manual machine tools
- 13
- 20
- 8 June 2026 at 23:53
  alecs
- Cheap digital spirit level accuracy 1 2
  Started by: Mick Bailey in: Workshop Tools and Tooling
- 18
- 41
- 8 June 2026 at 23:05
  Michael Gilligan
- Lightning 1 2
  Started by: duncan webster 1 in: Electronics in the Workshop
- 12
- 26
- 8 June 2026 at 22:48
  duncan webster 1
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 13
- 8 June 2026 at 22:46
  old mart
- Steam wagon “Meg” advice, please.
  Started by: Mike Henderson 1 in: Traction engines
- 6
- 10
- 8 June 2026 at 22:19
  [email protected]
- Noggin End Metals?
  Started by: anonymouse in: Materials
- 1
- 1
- 8 June 2026 at 21:26
  anonymouse
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 2
- 2
- 8 June 2026 at 20:10
  JasonB
- S,O,D 1 2
  Started by: larry phelan 1 in: The Tea Room
- 27
- 30
- 8 June 2026 at 18:14
  Roderick Jenkins
- Improving a 30 taper fit
  Started by: Andrew Skinner in: Manual machine tools
- 11
- 18
- 8 June 2026 at 17:11
  bernard towers
- where to find locomotive / train plans ?
  Started by: zuji miko in: Beginners questions
- 5
- 7
- 8 June 2026 at 16:32
  JA
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 13
- 8 June 2026 at 16:15
  AStroud
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 112
- 8 June 2026 at 12:58
  renardiere7
- PVC joints
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 10
- 8 June 2026 at 12:44
  blowlamp
- digital microscope for poor eyesight
  Started by: bernard towers in: Electronics in the Workshop
- 9
- 13
- 8 June 2026 at 08:13
  Dell
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 6
- 10
- 7 June 2026 at 19:51
  Grindstone Cowboy
- New to me Denbigh Power Hacksaw
  Started by: southernchap in: Manual machine tools
- 4
- 4
- 7 June 2026 at 12:14
  peak4
- ChatGPT … getting close to passing the Turing Test 1 2
  Started by: Michael Gilligan in: The Tea Room
- 15
- 35
- 7 June 2026 at 10:34
  alecs
- ML7: top slide feed screw washers?
  Started by: drnewcomb in: Manual machine tools
- 3
- 3
- 7 June 2026 at 10:23
  John Haine
- Taylor Hobson Pantograph Engraver Model D
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 7
- 18
- 6 June 2026 at 20:51
  Charles Jambon
- Table in the Mk1 Clarkson cutter grinder manual.
  Started by: Andrew Tinsley in: General Questions
- 3
- 6
- 6 June 2026 at 18:12
  Andrew Tinsley
- Band saw 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 23
- 70
- 6 June 2026 at 18:02
  Adam Harris
- Tapping Trick
  Started by: Steve Withnell in: Workshop Techniques
- 10
- 11
- 6 June 2026 at 17:43
  John Purdy
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 321
- 6 June 2026 at 16:15
  Phil Whitley

Sieg KX3 Spindle running backwards

Sieg KX3 Spindle running backwards

Latest Replies

Latest Issue

May 2026

Newsletter Sign-up

Latest Replies