WT2527 15cc four stroke

[Kevan Gillings 3Participant @kevangillings3]

HI, could any member give me information relating to the drawings for the above glow engine.

Kevan

[Kevan Gillings 3Participant @kevangillings3]

[John HinkleyParticipant @johnhinkley26699]

Kevan,

Have you done an Internet search? I just did and it threw up a number of hits, including the page for the WT2527 designer/builder at the engine plan page. Ok, it's in German, but for some reason there is an English version when I looked at it on my iPad. Also as a result of the search, there is a build thread on this very site – WT2527 build log. So far it has run to 4 pages and I have to admit that I haven't read it as it doesn't particularly interest me , but I gather from Jason's first reply, he's made one, too. You could do worse than have a look on Home Model Engine Machinist. There's almost certainly some reference there – probably Jason!

Good luck with your build; it looks a powerful and chunky motor.

John

[JasonBModerator @jasonb]

I think it is a case of e-maling him about purchasing the drawings. If you look at any of the sample drawings his e-mail is on them.

Not made one myself

Edited By JasonB on 03/02/2022 14:04:38

[John HinkleyParticipant @johnhinkley26699]

Sorry, Jason, I got the wrong end of the stick then. It must be one of the few you haven't made!

John

[Kevan Gillings 3Participant @kevangillings3]

Sorry lads, his web site is not available, no mention of drawings on the build forum..

Will try a check on HMEM.

Kevan

[JasonBModerator @jasonb]

I can get his website up OK, is it his e-mail being bounced back or the contact tab you are trying?

[Kevan Gillings 3Participant @kevangillings3]

HI, unable to get web site/e mail !!

[JasonBModerator @jasonb]

Try wolfgang@trotscher.com

Edited By JasonB on 03/02/2022 16:53:42

[Author]

Posts