Plans for Modular traction engine

[Eric GaddParticipant @ericgadd19460]

Acquire plans

[Eric GaddParticipant @ericgadd19460]

I am a relative new comer to model engineering having spent several years prior to hobby wood turning. To date I have made the O.B. Bolton #2 horizontal steam engine and the Stuart 10V. I then got ambitious and bought castings and material from Hemingway Engineering for the Hick V2 vertical crank engine. This building of this engine far exceeds my capability and rather than destroy expensive castings I am heeding the advice of a friend and attempt a model from ' bar stock' namely the Modular traction engine by J. G. Churchill. I have managed to acquire the relevant articles from past issues of Model Engineer but to date I am unable to locate/purchase the plans for this model.

I would appreciate any help/advice in sourcing the above

[JasonBModerator @jasonb]

I'm 99% sure that TE19 is the drawing set for Modular, maybe there is a member with an old MAP plans catalogue who could confirm.

If not ask Sarik if they can check what is on the set they sell as" Mod'r Tract'n eng'e" here

[paul rushmerParticipant @paulrushmer83015]

Hi Jason is correct TE 19 is Modular a 3/4 scale freelance traction engine (vol147) by J.G. Churchill

Hope this helps Paul

[Eric GaddParticipant @ericgadd19460]

Hello, thank you very much for the information. I have sent an email to Sarik requesting availability and price for the TE 19 plans.

[Author]

Posts