The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › I/C Engines › M10 x1 long reach spark plugs
Doe's any one know of a supplier of long reach M10 x 1 spark plugs, 12mm would be ideal. The standard length seems to be 7mm.
Thanks
Mick,
Not exactly an answer to your question, but this might be useful
MichaelG.
Try here
It looks like the sort of business we should encourage !
See About Us
Edited By Michael Gilligan on 13/03/2013 17:30:53
There are plenty of other lengths available rather than the common CM-6
Green Sparkplug have a good range, I've used them several times
Thanks to all, knew I could rely some one have a source, e-mail enquiry on its way
Home › Forums › I/C Engines › Topics
Started by: Andrew Tinsley in: General Questions
Mark Rand
Started by: Michael Gilligan in: The Tea Room
Bill Phinn
Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
Started by: Steve Withnell in: Workshop Techniques
Started by: Mick Bailey in: Workshop Tools and Tooling
Michael Gilligan
Started by: zuji miko in: Beginners questions
zuji miko
Started by: Andrew Skinner in: Manual machine tools
Howard Lewis
Started by: larry phelan 1 in: The Tea Room
JasonB
Started by: Peter Simpson 3 in: Beginners questions
Adam Harris
Started by: Nigel Graham 2 in: Manual machine tools
Vic
Started by: jaCK Hobson in: Workshop Tools and Tooling
Started by: Richard B in: Traction engines
Richard B
Started by: JasonB in: The Tea Room
Nicholas Farr
Started by: wigan2026 in: Workshop Tools and Tooling
wigan2026
Started by: wigan2026 in: Introduce Yourself – New members start here!
Harry Wilkes
Started by: dean clarke 2 in: I/C Engines
alecs
Started by: wilson logan 1 in: CAD – Technical drawing & design
Started by: barryblundell in: Workshop Tools and Tooling
Started by: Kevan Shaw in: General Questions
John Purdy
Started by: Richard S2 in: Related Hobbies including Vehicle Restoration
Richard S2
Started by: wigan2026 in: General Questions
Started by: Martin Johnson 1 in: Traction engines
Martin Johnson 1
Started by: David George 1 in: CAD – Technical drawing & design
David Jupp
Started by: Greensands in: Beginners questions
Alan Charleston
Started by: Baldric in: The Tea Room
Nigel Graham 2
View full reply list.