The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Website Questions, Comments, and Suggestions › Looking for a good quality bench grinder
Hi this is my first post. I am looking for recommendations for a good quality 230 v general purpose bench grinder with 8 inch diameter grind stones on both ends. Thanks
230v single phase 8 inch dia grinding stones
Hi,
This has been discussed many times, in the Search for 'keyword' box [above your first post'] put 'bench grinder & all will be revealed.
Tony
Creussen are first rate.
I've had a Screwfix one (8" for 6 yrs and given it plenty to do, on offer at the time (around £30)
I have a Creussen grinder no problems other than the tool rests needed strengthening.
I screwed a 5mm gauge plate top on from underneath to make it more stable.
David
Edited By David George 1 on 11/02/2020 19:29:06
I have one & they are excellent but £300 plus.
Home › Forums › Website Questions, Comments, and Suggestions › Topics
Started by: jimalm in: Electronics in the Workshop
jimalm
Started by: Andrew Tinsley in: Workshop Tools and Tooling
Chris Crew
Started by: Neil Wyatt in: 3D Printers and 3D Printing
jaCK Hobson
Started by: Lee Kennedy in: Manual machine tools
Dave Halford
Started by: duncan webster 1 in: Electronics in the Workshop
Robert Atkinson 2
Started by: berwick in: Beginners questions
alecs
Started by: barryblundell in: Materials
Russell Eberhardt
Started by: Kevan Shaw in: General Questions
John Purdy
Started by: jaCK Hobson in: Workshop Tools and Tooling
Started by: JasonB in: The Tea Room
Dalboy
Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
Neil Wyatt
Started by: Mark Willis in: Workshop Tools and Tooling
henrik83
Started by: duncan webster 1 in: The Tea Room
gerry madden
Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
John Hinkley
Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
Les Riley
Started by: Thomas Clarke in: General Questions
Luker
Started by: timdotd in: Books
DC31k
Started by: Nigel Graham 2 in: Manual machine tools
Nigel Graham 2
Started by: Robert James 3 in: Manual machine tools
Mark Rand
Started by: Gman in: Clocks and Scientific Instruments
iacooper
Started by: Neil Wyatt in: General Questions
Paul McDonough
Started by: lucerne in: Manual machine tools
lucerne
Started by: wigan2026 in: Workshop Tools and Tooling
Dusty
Started by: myfordmikeml7 in: General Questions
myfordmikeml7
View full reply list.