Fretting in Scunthorpe

Fretting in Scunthorpe

This topic has 5 replies, 5 voices, and was last updated 21 June 2021 at 11:07 by Clive Hartland.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
21 June 2021 at 09:25 #550687
Michael Gilligan
Participant
@michaelgilligan61133
Very impressive exhibit : **LINK**

https://www.bbc.co.uk/news/entertainment-arts-57513965?xtor=ES-208-%5B44989_NEWS_NLB_ACT_WK26_Mon_21_June%5D-20210621-%5Bbbcnews_ents_tanker_art%5D

MichaelG.
Advert

21 June 2021 at 09:25 #36465
Michael Gilligan
Participant
@michaelgilligan61133
21 June 2021 at 09:40 #550689
JasonB
Moderator
@jasonb
Bet he has got a deep saw frame
21 June 2021 at 09:56 #550691
noel shelley
Participant
@noelshelley55608
The colour seems to indicate it's become a shell of it's former self ! Noel
21 June 2021 at 09:59 #550693
Alan Jackson
Participant
@alanjackson47790
I bet the fuel tank is intact
21 June 2021 at 11:07 #550715
Clive Hartland
Participant
@clivehartland94829
Thats one way to lighten the load!
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 20
- 15 September 2026 at 20:26
  Wade Beatty
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 6
- 8
- 15 September 2026 at 19:08
  Mike Crossfield
- Robinson scale engine
  Started by: Frank Waugh in: Stationary engines
- 2
- 2
- 15 September 2026 at 18:49
  JasonB
- New to castings
  Started by: BOB BLACKSHAW 1 in: Workshop Techniques
- 4
- 8
- 15 September 2026 at 18:06
  JasonB
- Pittler C3 lathe, dividing and gear cutting attachments
  Started by: vic newey in: Workshop Tools and Tooling
- 1
- 1
- 15 September 2026 at 17:59
  vic newey
- Do you chase a galvanized thread, or leave it alone?
  Started by: elowen01 in: Workshop Tools and Tooling
- 6
- 8
- 15 September 2026 at 16:49
  noel shelley
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 13
- 16
- 15 September 2026 at 16:42
  Graham Meek
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 15 September 2026 at 16:31
  DC31k
- Microscope eyepieces
  Started by: gerry madden in: Clocks and Scientific Instruments
- 3
- 6
- 15 September 2026 at 15:46
  Michael Gilligan
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 11
- 19
- 15 September 2026 at 15:31
  voelkel
- Myford ML7 Motor
  Started by: ian Holdsworth in: Manual machine tools
- 4
- 4
- 15 September 2026 at 09:57
  Michael Gilligan
- Octopus Heat Pump 1 2 3
  Started by: Michael Gilligan in: The Tea Room
- 20
- 63
- 15 September 2026 at 09:46
  Michael Gilligan
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 2
- 3
- 15 September 2026 at 08:40
  bernard towers
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 9
- 15 September 2026 at 01:09
  carlw
- 4¾” 13swg copper tubing?
  Started by: martynt50 in: Materials
- 8
- 10
- 14 September 2026 at 22:36
  Mick Bailey
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 15
- 14 September 2026 at 21:57
  Mike Crossfield
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 13
- 14 September 2026 at 21:34
  John Purdy
- Revolution – The Future is Out There!
  Started by: JasonB in: Stationary engines
- 3
- 5
- 14 September 2026 at 20:50
  JA
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 2
- 2
- 14 September 2026 at 20:15
  Roger B
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 2
- 2
- 14 September 2026 at 18:54
  JasonB
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 6
- 14 September 2026 at 18:11
  Richard B
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 6
- 13
- 14 September 2026 at 18:07
  Mick Bailey
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 12
- 14 September 2026 at 16:29
  JasonB
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 6
- 14 September 2026 at 15:19
  Bazyle
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 6
- 10
- 14 September 2026 at 12:05
  Chris Gunn

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies