Dore-Westbury power feed

[Cornish JackParticipant @cornishjack]

G'day all.

I recently bought a set of castings for the D-W Mill power feed add-on (as supplied by M E S) It does not have any accompanying drawings. I believe that there may be copies on the D-W Yahoo group but, although I can log-in, I am unable to access either Files or Photos nor post on the Conversations.

I have got copies of MEW 14,15 and 16 which cover a home-made version and I have ordered the 1989 copies of ME which, apparently, also detail something similar. Does any member have access to any of the original M E S drawings (paper or digital) which I could purchase, please?

rgds

Bill

[Cornish JackParticipant @cornishjack]

[not done it yetParticipant @notdoneityet]

If you click on the three bars at the top left of the yahoo page it should list your yahoo groups. Clicking on the d-w line should provide some contact e-mail addys to get you sorted out re accessing files etc.

Good luck – it is yahoo!

[RobboParticipant @robbo]

Bill

I've got a pdf of the drawings from the Yahoo Group, plus the parts list. If I've still got your email I'll send it.

There is a file on the D-W Group which is called "Build Instructions", but it's only got the first 3 pages (2 of which are the parts list). The full instructions run to about 28 pages. The rest seem to have got lost.

[Cornish JackParticipant @cornishjack]

Thank you ndiy – unfortunately, there isn't a three bar saymbol on the page I end up on Of the three function groups on the page – Conversations, photos and files, the only one which responds is conversations and, although I can read the posts I cannot post a message. I have tried several suggested options since earlier this year but none have worked , so far! Very frustrating!!

rgds

Bill

[Brian WoodParticipant @brianwood45127]

Hello Cornish Jack,

I can help with original drawings and build notes plus some extra and useful information if you will send me your address.

My email address is wood_y(at)btinternet(dot)com

Regards

Brian

[Cornish JackParticipant @cornishjack]

Brian – thank you very much for that kind offer. Message on its way shortly.

rgds

Bill

[Cornish JackParticipant @cornishjack]

What an exceptionally helpful forum this is!

I must publicly thank Robbo, (yet again!), Brian, (above) and Peak 4 (another Bill) who have responded so helpfully to my query. I get the impression that it is a 'model-engineer/men's sheds' thing. Rarely see much evidence of similar fellowship elsewhere, nowadays. Many thanks, gentlemen, long may you prosper!!

rgds

Bill

[not done it yetParticipant @notdoneityet]

Here is the email addy for the owner of that forum. He/she should be able to sort out your problems with accessing the forum.

Owner :[email protected]

[Author]

Posts