Anyone recognise this tailstock ?

[John Stevenson 1Participant @johnstevenson1]

[John Stevenson 1Participant @johnstevenson1]

Presume it's off a cutter grinder of some make.

Base is 3" square and centre hight is 2 1/4"

Came in a job lot of stuff and I'm not interested.

Before I lob it at next doors cat, any use to anyone ?

[RainbowsParticipant @rainbows]

I recognise that from a lathe, gonna check the lathes website to confirm in a minute

 

Turns out I was wrong, doesn't have the hole in the middle. Has a similar method of moving the barrel as a HTH lathe though.

Edited By Rainbows on 27/10/2015 20:21:33

[Neil WyattModerator @neilwyatt]

Could replace an adept lathe for anyone wanting a micro-adjustable door-stop.

N.

[T.BParticipant @t-b-2]

First post as i'm more of a lurker really !

But it looks like its from a Centec to me, to go with the Centec dividing head.

I'd happily give you the price of a few beers John and pay the postage, as i have one of the mills it was designed to be used on.

tris

[Michael GilliganParticipant @michaelgilligan61133]

Give that man a prize

**LINK**

MichaelG.

[John Stevenson 1Participant @johnstevenson1]

Posted by T.B on 27/10/2015 21:18:06:

First post as i'm more of a lurker really !

But it looks like its from a Centec to me, to go with the Centec dividing head.

I'd happily give you the price of a few beers John and pay the postage, as i have one of the mills it was designed to be used on.

tris

.

Sold to the man in the ill fitting moleskin trousers.

Postage will be fine, I'll PM you.

[Author]

Posts