A4

A4

This topic has 5 replies, 4 voices, and was last updated 14 February 2020 at 17:39 by Former Member.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
12 February 2020 at 11:30 #451823
Peter Newton 3
Participant
@peternewton3
Hello. Has anyone using this forum built a 5” gauge A4 loco?
Advert

12 February 2020 at 11:30 #39530
Peter Newton 3
Participant
@peternewton3
12 February 2020 at 13:31 #451846
Former Member
Participant
@formermember19781
[This posting has been removed]
12 February 2020 at 16:41 #451865
Howard Lewis
Participant
@howardlewis46836
D A G Brown, exhibited an A4 as WIP at Spalding a few years ago.

Don't t know if he is registered on the forum, or reads it regularly

Try sending a PM. If he is not registered, his name will not be on the list.

Howard
12 February 2020 at 16:57 #451872
Brian Baker 2
Participant
@brianbaker2
Greetings, I am part way through a much modified Modelworks kit in 71/4.

regards

Brian
14 February 2020 at 17:39 #452210
Former Member
Participant
@formermember19781
[This posting has been removed]
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Long screwfriver,I know that it usually works but why?
  Started by: File Handle in: The Tea Room
- 15
- 22
- 1 September 2026 at 19:08
  Michael Gilligan
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 46
- 174
- 1 September 2026 at 18:43
  File Handle
- Jaxon Steam Car ride to the next beergarden
  Started by: Werner Schleidt in: Traction engines
- 4
- 5
- 1 September 2026 at 16:26
  Werner Schleidt
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 19
- 46
- 1 September 2026 at 16:08
  old mart
- Emco SL1000 lathe/drill/mill
  Started by: old mart in: Manual machine tools
- 1
- 1
- 1 September 2026 at 15:42
  old mart
- How long?
  Started by: Adrian 2 in: The Tea Room
- 9
- 12
- 1 September 2026 at 15:15
  JasonB
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 19
- 1 September 2026 at 12:58
  Martin Johnson 1
- Working at a different scale
  Started by: Adrian R2 in: The Tea Room
- 2
- 2
- 1 September 2026 at 10:35
  Michael Gilligan
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 9
- 1 September 2026 at 07:38
  Andrew Crow
- Alternative to a ‘fly’ for braking a clock striking train
  Started by: lfoggy in: Clocks and Scientific Instruments
- 7
- 8
- 31 August 2026 at 23:13
  Nigel Graham 2
- Emco FB2 Quirks and Additions 1 2 3 4
  Started by: Graham Meek in: Manual machine tools
- 19
- 94
- 31 August 2026 at 20:03
  Ex contributor
- Boiler Stays
  Started by: donall.cullinane in: Locomotives
- 3
- 4
- 31 August 2026 at 17:25
  duncan webster 1
- Advice on a new lathe
  Started by: johnhindle in: General Questions
- 10
- 13
- 31 August 2026 at 16:56
  Howard Lewis
- GRAVOGRAPH AF3
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 7
- 13
- 31 August 2026 at 16:25
  Speedy Builder5
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 44
- 54
- 31 August 2026 at 16:13
  Howard Lewis
- Angles to grind for 303 stainless
  Started by: paul1956 in: Beginners questions
- 14
- 23
- 31 August 2026 at 12:41
  Michael Gilligan
- Question about GHT’s retracting topslide drawing
  Started by: ega in: Workshop Tools and Tooling
- 8
- 24
- 31 August 2026 at 11:51
  Graham Meek
- Myford motor playing up
  Started by: vintagengineer in: Help and Assistance! (Offered or Wanted)
- 6
- 16
- 30 August 2026 at 20:30
  Bazyle
- Hot rolled angle problems 1 2
  Started by: Mick Bailey in: Materials
- 19
- 44
- 30 August 2026 at 19:22
  Bill Phinn
- CHUCK Name
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 12
- 17
- 30 August 2026 at 14:22
  gerry madden
- folding pins 3 pin plug
  Started by: Ian Parkin in: Help and Assistance! (Offered or Wanted)
- 4
- 6
- 30 August 2026 at 11:42
  Adrian R2
- Gauge widening
  Started by: martian in: Beginners questions
- 3
- 4
- 30 August 2026 at 11:00
  noel shelley
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 22
- 30 August 2026 at 08:43
  Peter Hoerlein
- Reconstruction of dimensions fom a photo…
  Started by: Robin Graham in: Beginners questions
- 8
- 20
- 30 August 2026 at 08:24
  Michael Gilligan
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 329
- 29 August 2026 at 16:01
  Phil Whitley

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies