iscar insert extractor

iscar insert extractor

This topic has 7 replies, 2 voices, and was last updated 10 August 2011 at 22:29 by Ian Welford.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
2 July 2011 at 21:34 #71247
Ian Welford
Participant
@ianwelford58739
It’s a long sot but…

as anyone got an Iscar Do grip DGF 32 – 4 parting tool blade and the extractor / insert inserting tool ? I would like to know the centre distance betwwen the pins to enable me to make a wrench for inserting and removing the inserts.

Got the blade and suitable inserts but the tool I got ain’t the right one to insert the inserts .

Made a dickinson holder for it, all going wonderfully until I came to the point of nserting the insert to enable me to set the tool height!

Tried 2 dealers by e mail but no reponse as yet. On that vein- anyone recommend any dealers?

Thanks Ian
Advert

2 July 2011 at 21:34 #5566
Ian Welford
Participant
@ianwelford58739
centee distance to make an inserter / e
3 July 2011 at 10:11 #71257
KWIL
Participant
@kwil
Ian,

Tool is 2.5mm dia pins on 11 mm centres. One pin has a 1 mm shoulder to hold the tool clear of the blade. When this pin is inserted in the hole, the extractor pin bears on the centre of the upright edge at the rear of the insert. Very little force is needed.

Regards

K
3 July 2011 at 10:17 #71258
KWIL
Participant
@kwil
Ian,

Cutwel Tools extractor SW15S is the same tool and appears to fit all blade sizes. http://www.cutweltools.co.uk (Usual disclaimer)

K
3 July 2011 at 20:25 #71309
Ian Welford
Participant
@ianwelford58739
many thanks KWIL

I shall contact asap.

Ian
3 July 2011 at 20:25 #71310
Ian Welford
Participant
@ianwelford58739
many thanks KWIL

I shall contact asap.

Ian
5 July 2011 at 21:24 #71368
Ian Welford
Participant
@ianwelford58739
What a helpful firm to deal with. Fair prices too ! Cutwel tools!

Ian
10 August 2011 at 22:29 #73151
Ian Welford
Participant
@ianwelford58739
KWIL

sack cloth and ashes! The cutwel extractor does not work! Does look damn similar though ! Just incase anyone else has the same issue!

However I stick by my comments about them as they’ve taken it back without any issue and |I got some other tips instead

Ian
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 32
- 57
- 6 July 2026 at 04:05
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 12
- 13
- 6 July 2026 at 01:16
  howardb
- Accolade
  Started by: Bill Dawes in: General Questions
- 8
- 8
- 6 July 2026 at 00:18
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 119
- 6 July 2026 at 00:13
  Nigel Graham 2
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 17
- 24
- 5 July 2026 at 22:15
  george baker 1
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 16
- 33
- 5 July 2026 at 21:54
  Vic
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 10
- 5 July 2026 at 20:43
  Dougie Swan
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 6
- 9
- 3 July 2026 at 22:23
  Mark Rand
- Leadscrew Handwheel for Warco WM180
  Started by: James A in: Manual machine tools
- 9
- 17
- 3 July 2026 at 20:45
  Andy Stopford
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 10
- 3 July 2026 at 19:28
  Clive Foster
- Gas Tap Valves. Vintage 1 2 3 4
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 22
- 88
- 3 July 2026 at 18:36
  duncan webster 1
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 65
- 3 July 2026 at 17:20
  vintagengineer
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 8
- 3 July 2026 at 10:54
  bernard towers
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 58
- 2 July 2026 at 22:45
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 85
- 2 July 2026 at 22:38
  Vic
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies