Have you looked at the Myford site, certainly listed.

**LINK**

Edited By V8Eng on 26/06/2015 08:51:37

I only have small oilers on my Drumond M series and no wicks

I use colloidal graphite mixed with my chosen oil and use a small pipet and an old plastic pills container

The plastic cup of mixed oil has a small round neodymium magnet in it, to collect any metal dust

No problems after 5 years

I find that I do my slideways and leadscrews a lot more than my headstock bearings, so a drip into the headstock oilers when I do my slideways has been the habit

The plastic pipet allows me to put oil accurately pretty much anywhere on the lathe, anytime I want

Edited By Ady1 on 26/06/2015 09:21:36

I bought these for oiling. I'm also going to try one for applying small quantities of cutting oil to the brush I use on the lathe. A smear of cutting oil can make a big difference. No problem using them to put a few drops of oil even in very small oiler cups.

Ebay 131440006606

Anyone know what the small diameter of these wicks are approx and the length?

John

–