Automate the Shutter button

This topic has 10 replies, 6 voices, and was last updated 5 April 2015 at 18:38 by Bo SandstrÃ¶m.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
4 April 2015 at 20:26 #23801
martin perman 1
Participant
@martinperman1
Advert

4 April 2015 at 20:26 #185560
martin perman 1
Participant
@martinperman1
Gentlemen,

My camera doesn't have a delayed shutter timer, technically is does but I have to hold the button down for up to 30 seconds, so I thought that I would replace my finger with an automated device but I have no idea what the thread is in the middle of my shutter button, can anybody help please.

Martin P
4 April 2015 at 20:42 #185563
“Bill Hancox”
Participant
@billhancox
For a mechanical. shutter release.

Bill
4 April 2015 at 21:07 #185568
martin perman 1
Participant
@martinperman1
sorry forgot that bit, I want to fit a solenoid which is controlled by a timer which can be set to work up to the camera's max of 30 seconds.

Martin P
4 April 2015 at 21:44 #185571
Ian Parkin
Participant
@ianparkin39383
I would buy a cable release which has the correct thread form already then fit your solonoid on the end of that and decouples any vibration from your camera when the solonoid actuates

The thread is a tapered one ( i assume you knew that )
5 April 2015 at 09:59 #185595
Neil Wyatt
Moderator
@neilwyatt
Sorry Martin, I'm a little confused.

Is it the self timer for delayed exposures or is it the 'B' setting for long exposures?

If the self timer, it sounds like it is broken

For the latter I have a cable release with a locking screw, press in, lock the screw and leave for as long as you want.

Yuo can control the exposure time with a black hat over the lens.

Neil
5 April 2015 at 13:25 #185628
martin perman 1
Participant
@martinperman1
Neil,

Everything works ok, the problem is the idiot operating the camera, I have this problem when using the button or a cable in that I snatch and cause a shake particularly when using the B function which requires me to hold the button pressed for the time required up to a max of 30 seconds so I thought I could make a device to do it for me.

Martin P
5 April 2015 at 13:32 #185629
Clive Hartland
Participant
@clivehartland94829
I have seen clockwork timers on ebay to fit cameras. Have a look. Which camera do you have?

Clive
5 April 2015 at 14:14 #185636
Neil Wyatt
Moderator
@neilwyatt
Martin,

just get a locking cable release, and hold it so there's a reasonable bend in it – that way you won't snatch.

Neil
5 April 2015 at 16:27 #185647
martin perman 1
Participant
@martinperman1
Neil,

Found the answer, went onto Amazon to get what you suggested and found a switch with cable which plugs into the mini USB on my camera which operates the trigger electronically and it also has a lock for the B function so no more snatching of cables or buttons.

Martin P
5 April 2015 at 18:38 #185653
Bo SandstrÃ¶m
Participant
@bosandstram
Search the web for Autoknips, An ancient device that may be what you are looking for
Author

Posts