Free Plan: A Toolmaker’s Hammer

Free Plan: A Toolmaker’s Hammer

This topic has 5 replies, 5 voices, and was last updated 5 November 2014 at 04:28 by Roger Provins 2.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
4 November 2014 at 12:05 #39689
Neil Wyatt
Moderator
@neilwyatt
Advert

4 November 2014 at 12:05 #168526
Neil Wyatt
Moderator
@neilwyatt
The latest free plan is Derek Winks' Toolmaker's Hammer, as originally included with issue 8 of Model Engineers' workshop.

http://www.model-engineer.co.uk/news/article/free-plan-a-toolmakers%27-hammer/19751

Neil

Edited By Neil Wyatt on 04/11/2014 12:06:17
4 November 2014 at 17:57 #168554
Boiler Bri
Participant
@boilerbri
Nice one Neil, I like unusual tools, will have to have a 'bash' at one of them 😝

Brian
4 November 2014 at 18:04 #168556
Michael Gilligan
Participant
@michaelgilligan61133
4 November 2014 at 18:06 #168558
Bazyle
Participant
@bazyle
on first sight I thought the hole was going to be a bottle opener……….
5 November 2014 at 04:28 #168579
Roger Provins 2
Participant
@rogerprovins2
How unusual, I'll have try at making this, never seen anything like it before.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Myford ML7 Motor
  Started by: ian Holdsworth in: Manual machine tools
- 1
- 1
- 14 September 2026 at 23:04
  ian Holdsworth
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 11
- 13
- 14 September 2026 at 22:52
  Charles Lamont
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 1
- 2
- 14 September 2026 at 22:46
  Mick Bailey
- 4¾” 13swg copper tubing?
  Started by: martynt50 in: Materials
- 8
- 10
- 14 September 2026 at 22:36
  Mick Bailey
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 15
- 14 September 2026 at 21:57
  Mike Crossfield
- Octopus Heat Pump 1 2 3
  Started by: Michael Gilligan in: The Tea Room
- 19
- 56
- 14 September 2026 at 21:56
  Michael Gilligan
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 13
- 14 September 2026 at 21:34
  John Purdy
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 14 September 2026 at 21:07
  bernard towers
- Revolution – The Future is Out There!
  Started by: JasonB in: Stationary engines
- 3
- 5
- 14 September 2026 at 20:50
  JA
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 8
- 14 September 2026 at 20:33
  John Haine
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 2
- 2
- 14 September 2026 at 20:15
  Roger B
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 2
- 2
- 14 September 2026 at 18:54
  JasonB
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 1
- 1
- 14 September 2026 at 18:16
  Mike Crossfield
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 6
- 14 September 2026 at 18:11
  Richard B
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 6
- 13
- 14 September 2026 at 18:07
  Mick Bailey
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 12
- 14 September 2026 at 16:29
  JasonB
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 6
- 14 September 2026 at 15:19
  Bazyle
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 6
- 10
- 14 September 2026 at 12:05
  Chris Gunn
- Question about GHT’s retracting topslide drawing 1 2
  Started by: ega in: Workshop Tools and Tooling
- 9
- 28
- 14 September 2026 at 11:35
  ega
- WARNING: Phishing Attempt on MMEE Bookings?
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 3
- 3
- 14 September 2026 at 11:34
  JohnF
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 7
- 10
- 14 September 2026 at 08:39
  JasonB
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 47
- 182
- 14 September 2026 at 08:27
  JasonB
- LG Smart TVs
  Started by: Michael Gilligan in: The Tea Room
- 11
- 14
- 13 September 2026 at 18:12
  Michael Gilligan
- Seig sx2p mill
  Started by: BOB BLACKSHAW 1 in: Manual machine tools
- 3
- 8
- 13 September 2026 at 13:12
  Ches Green UK
- Wilson Slant Bed Lathe
  Started by: JC54 in: Manual machine tools
- 7
- 16
- 13 September 2026 at 11:44
  odubhain82

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies