Linisher/belt sander issues

Linisher/belt sander issues

This topic has 2 replies, 3 voices, and was last updated 10 October 2025 at 16:01 by Vic.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
10 October 2025 at 10:11 #819633
Greensands
Participant
@greensands
I have recently stocked up on my supply 610×75 linisher/sander belts in grades P80 and P120 but have not been able to find a source of finer grades in this size. The P80 is used for wood working where it is excellent for bring end sections to length and the P120 for my metal working but there are times when a finer grade eould be useful. Possible sources of supply would be most useful.
<p style=”text-align: left;”>I also have an issue with the clunk/clunk interruption on always gets after fitting a new belt despite taking great care to following the directional arrows. The problem fade with time as the belt wears in/out but I would be interested to know of other peoples experiences. All thoughts and ideas most welcomed.</p>
I
Advert

10 October 2025 at 10:23 #819638
JasonB
Moderator
@jasonb
down to 600g here

https://www.abrasivesplus.com/buy/75mm-x-610mm-cloth-belt-for-portable-belt-sanders_121.htm
10 October 2025 at 16:01 #819712
Vic
Participant
@vic
Some abrasive suppliers will make up belts from any commonly available abrasive, albeit there’s normally a minimum quantity of at least ten belts. Another alternative is to make your own.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- How Good Are 3D Printers?
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 4
- 4
- 14 June 2026 at 22:44
  Mark Rand
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 66
- 14 June 2026 at 21:29
  Julie Ann
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 13
- 25
- 14 June 2026 at 21:24
  Julie Ann
- Taper Identification
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 2
- 2
- 14 June 2026 at 20:46
  Chris Crew
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 7
- 8
- 14 June 2026 at 12:22
  Dave Halford
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 14
- 51
- 14 June 2026 at 11:07
  Robert Atkinson 2
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 12
- 16
- 14 June 2026 at 10:18
  alecs
- Axle pin question – choice of material and possible need for case hardening?
  Started by: barryblundell in: Materials
- 4
- 4
- 14 June 2026 at 09:21
  Russell Eberhardt
- Wallace valvegear simulator
  Started by: Kevan Shaw in: General Questions
- 7
- 23
- 13 June 2026 at 18:43
  John Purdy
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 30
- 13 June 2026 at 17:56
  jaCK Hobson
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 115
- 13 June 2026 at 15:38
  Dalboy
- Hindu ascetic in picture gallery
  Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
- 3
- 3
- 13 June 2026 at 15:37
  Neil Wyatt
- Bridgeport Milling Machine feed control module
  Started by: Mark Willis in: Workshop Tools and Tooling
- 13
- 25
- 13 June 2026 at 13:08
  henrik83
- international exhibition 1862
  Started by: duncan webster 1 in: The Tea Room
- 9
- 13
- 13 June 2026 at 11:41
  gerry madden
- Air Duster
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 4
- 5
- 13 June 2026 at 10:00
  jaCK Hobson
- Bridgeport Series 1 CNC 1 2
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 50
- 13 June 2026 at 08:43
  Les Riley
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 10
- 14
- 13 June 2026 at 08:33
  Luker
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 6
- 7
- 13 June 2026 at 08:22
  DC31k
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 30
- 12 June 2026 at 23:11
  Nigel Graham 2
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 226
- 12 June 2026 at 21:50
  Mark Rand
- Clockmaking starter project?
  Started by: Gman in: Clocks and Scientific Instruments
- 10
- 19
- 12 June 2026 at 20:21
  iacooper
- 3 1/2″ Gauge Discussion Group 1 2 3
  Started by: Neil Wyatt in: General Questions
- 37
- 70
- 12 June 2026 at 17:16
  Paul McDonough
- Boxford CUD cabinet screw sizes and threads
  Started by: lucerne in: Manual machine tools
- 7
- 10
- 12 June 2026 at 17:15
  lucerne
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 7
- 12
- 12 June 2026 at 16:20
  Dusty
- ML7 help please!
  Started by: myfordmikeml7 in: General Questions
- 7
- 8
- 12 June 2026 at 11:22
  myfordmikeml7

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies