Help on finished engine

This topic has 3 replies, 2 voices, and was last updated 10 July 2012 at 19:37 by Wolfie.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
9 July 2012 at 23:24 #94040
Wolfie
Participant
@wolfie
I have finally finished my first engine, a Stuart S50 built from plans.

Its loose-ish I can turn it by hand and when I attach a drill to the crankshaft it goes great.

But apply the compressed air and it does nowt. In fact the air appears to be exiting directly via the exhaust.

Help!
Advert

9 July 2012 at 23:24 #6231
Wolfie
Participant
@wolfie
10 July 2012 at 07:25 #94049
JasonB
Moderator
@jasonb
Its possibly the valve not sitting well on the port face. Assemble the engine but leave the valve chest cover off then turn the engine over by hand and make sure the valve is not being lifted off the face. You may need a few light strokes of a file in the slot the valve nut goes into.

Its also possible you have just got teh timing wrong. Does the air escape all teh time as the flywheel is rotated by hand or only at two points around the full turn?

J
10 July 2012 at 19:37 #94097
Wolfie
Participant
@wolfie
Its all the time although there is some variation.

I suspect that my valve is a tad too long and its letting air under the edge of it and out through the exhaust, I've turned it so the long side is the sliding edge (if that makes sense!) but now its not sitting properly and I don't have the correct tools here to do anything about it.

The pitfalls of having your workshop a mile across town grrrrrrrr
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Band saw 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 24
- 74
- 14 July 2026 at 23:41
  Adam Harris
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 5
- 8
- 14 July 2026 at 22:36
  noel shelley
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 14
- 17
- 14 July 2026 at 21:17
  vintagengineer
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 12
- 49
- 14 July 2026 at 20:02
  Graham Meek
- What is this? 1 2
  Started by: Sonic Escape in: General Questions
- 18
- 26
- 14 July 2026 at 19:52
  Andy Stopford
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 13
- 14 July 2026 at 19:30
  Graeme Seed
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD! 1 2
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 19
- 46
- 14 July 2026 at 17:40
  Neil A
- QCTP 1 2
  Started by: James A in: Workshop Tools and Tooling
- 19
- 30
- 14 July 2026 at 17:00
  Diogenes
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 9
- 14 July 2026 at 14:53
  old mart
- Bonding brass hubs to steel
  Started by: mikemunson in: Beginners questions
- 3
- 4
- 14 July 2026 at 11:27
  Michael Gilligan
- Lathe coolant applicators 1 2
  Started by: lucerne in: Manual machine tools
- 16
- 30
- 14 July 2026 at 09:15
  Julie Ann
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 58
- 14 July 2026 at 01:49
  seemack
- Small electromagnetic pump via E-Bay
  Started by: Clive Foster in: Manual machine tools
- 5
- 8
- 13 July 2026 at 20:02
  John Hinkley
- Windows 11 background pictures
  Started by: old mart in: The Tea Room
- 4
- 4
- 13 July 2026 at 19:49
  Mark Rand
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 139
- 13 July 2026 at 17:58
  duncan webster 1
- pitman arm
  Started by: martin haysom in: General Questions
- 6
- 9
- 13 July 2026 at 17:00
  Dave Halford
- Martin Cleeve Swing Clear Retracting Toolholder 1 2
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 18
- 27
- 13 July 2026 at 15:21
  ega
- Boiler problem
  Started by: Zan in: Help and Assistance! (Offered or Wanted)
- 5
- 8
- 13 July 2026 at 14:25
  Zan
- First Printer
  Started by: vintagengineer in: 3D Printers and 3D Printing
- 7
- 8
- 13 July 2026 at 13:47
  John Haine
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 7
- 12
- 13 July 2026 at 08:28
  Dell
- Cleaning years of nicotine exposure and some touch ups
  Started by: rumz in: Traction engines
- 5
- 6
- 12 July 2026 at 18:00
  Georgineer
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 23
- 12 July 2026 at 12:00
  Howard Lewis
- Metal saw
  Started by: Speedy Builder5 in: Workshop Techniques
- 4
- 4
- 12 July 2026 at 10:25
  martin haysom
- SmallRig Cheese Plate
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 4
- 10
- 12 July 2026 at 10:05
  Michael Gilligan
- Another what’s this thread….
  Started by: Hollowpoint in: General Questions
- 6
- 9
- 11 July 2026 at 23:48
  Nigel Graham 2

Help on finished engine

Help on finished engine

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies