25mm clarkson autolock

25mm clarkson autolock

This topic has 10 replies, 6 voices, and was last updated 8 March 2012 at 19:52 by Weldsol.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
8 March 2012 at 00:08 #6023
alan knight
Participant
@alanknight67321
Advert

8 March 2012 at 00:08 #86786
alan knight
Participant
@alanknight67321
Does such a thing exsist or am I chasing pie in the sky?
8 March 2012 at 00:11 #86787
John Stevenson 1
Participant
@johnstevenson1
Yes in the large series, can be had with 25mm collet, 30m collet, 1" collet and 1 1/4" collet.

John S.
8 March 2012 at 00:23 #86788
alan knight
Participant
@alanknight67321
Thanks do they do that for the r8 taper?
8 March 2012 at 00:51 #86789
John Stevenson 1
Participant
@johnstevenson1
MT3,MT4, R8, INT30, INT 40 and INT 50.
8 March 2012 at 01:23 #86791
alan knight
Participant
@alanknight67321
Thanks john where would be the best place to track one down?
8 March 2012 at 10:02 #86800
NJH
Participant
@njh
Alan

You could just put "Clarkson Autolock" into ebay – there are several there..

Norman
8 March 2012 at 14:42 #86817
Ian Welford
Participant
@ianwelford58739
Alan

Think there's an R8 one on there now. try "autolcok" as sometimes it dioesn't pick it up if you specify "Clarkson"

Ian
8 March 2012 at 14:42 #86818
Ian Welford
Participant
@ianwelford58739
Oops can't spell- that shoule of course read "autolock"

Ian
8 March 2012 at 19:22 #86834
S.D.L.
Participant
@s-d-l
Posted by John Stevenson on 08/03/2012 00:11:04:

Yes in the large series, can be had with 25mm collet, 30m collet, 1" collet and 1 1/4" collet.

John S.

They also do an intermediate size that only takes the 25mm / 1" collet

Steve Larner
8 March 2012 at 19:52 #86836
Weldsol
Participant
@weldsol
As an alternative there is the Osborn Titanic which is available with R8 taper

Paul
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- SmallRig Cheese Plate
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 7
- 12 July 2026 at 05:10
  Michael Gilligan
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 37
- 12 July 2026 at 01:35
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 138
- 12 July 2026 at 01:00
  Nigel Graham 2
- Boiler problem
  Started by: Zan in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 11 July 2026 at 23:55
  Nigel Graham 2
- Another what’s this thread….
  Started by: Hollowpoint in: General Questions
- 6
- 9
- 11 July 2026 at 23:48
  Nigel Graham 2
- What is this?
  Started by: Sonic Escape in: General Questions
- 16
- 24
- 11 July 2026 at 22:45
  Paul Mills 4
- First Printer
  Started by: vintagengineer in: 3D Printers and 3D Printing
- 3
- 3
- 11 July 2026 at 22:23
  Peter Tucker
- Lathe coolant applicators 1 2
  Started by: lucerne in: Manual machine tools
- 15
- 27
- 11 July 2026 at 22:19
  Julie Ann
- Metal saw
  Started by: Speedy Builder5 in: Workshop Techniques
- 3
- 3
- 11 July 2026 at 19:58
  Robert Atkinson 2
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 7
- 8
- 11 July 2026 at 19:34
  Mark Rand
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 12
- 23
- 11 July 2026 at 17:08
  Michael Gilligan
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 53
- 11 July 2026 at 13:57
  Adam Harris
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 5
- 6
- 11 July 2026 at 13:11
  JasonB
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 53
- 11 July 2026 at 12:34
  Dave Halford
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 12
- 11 July 2026 at 10:03
  JasonB
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 5
- 10 July 2026 at 21:37
  old mart
- Cotton-covered flex
  Started by: Kiwi Bloke in: Materials
- 9
- 10
- 10 July 2026 at 20:03
  howardb
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 22
- 10 July 2026 at 19:39
  Clive Steer
- Farm Boy – Drawing 11
  Started by: Speedy Builder5 in: I/C Engines
- 4
- 4
- 10 July 2026 at 17:15
  John Purdy
- When is a new 90 degree drill not 90 degrees? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 21
- 49
- 10 July 2026 at 16:48
  Nicholas Farr
- BridgePort Interact 1 Mk2 parameters
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:31
  tomcnc
- Bridgeport Interact 1 Mark 2 circuit diagrams
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:16
  tomcnc
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 5
- 5
- 9 July 2026 at 20:27
  Wade Beatty
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 12
- 18
- 9 July 2026 at 19:08
  Michael Gilligan
- Transformer question
  Started by: Wade Beatty in: Electronics in the Workshop
- 3
- 5
- 9 July 2026 at 17:30
  Robert Atkinson 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies