The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Beginners questions › 25mm clarkson autolock
Does such a thing exsist or am I chasing pie in the sky?
Yes in the large series, can be had with 25mm collet, 30m collet, 1" collet and 1 1/4" collet.
John S.
Thanks do they do that for the r8 taper?
MT3,MT4, R8, INT30, INT 40 and INT 50.
Thanks john where would be the best place to track one down?
Alan
You could just put "Clarkson Autolock" into ebay – there are several there..
Norman
Think there's an R8 one on there now. try "autolcok" as sometimes it dioesn't pick it up if you specify "Clarkson"
Ian
Oops can't spell- that shoule of course read "autolock"
They also do an intermediate size that only takes the 25mm / 1" collet
Steve Larner
As an alternative there is the Osborn Titanic which is available with R8 taper
Paul
Home › Forums › Beginners questions › Topics
Started by: Geoff Byman in: Manual machine tools
Nicholas Farr
Started by: John MC in: CAD – Technical drawing & design
JasonB
Started by: Peter Hoerlein in: Work In Progress and completed items
Peter Hoerlein
Started by: michael howarth 1 in: General Questions
Dell
Started by: Ian Kitson in: Hints And Tips for model engineers
Ian Kitson
Started by: carlw in: Clocks and Scientific Instruments
sandyroman
Started by: Geoff Dunsby in: General Questions
bernard towers
Started by: Andrew Tinsley in: General Questions
Dave Halford
Started by: Machine-DRO in: Website Announcements
Started by: Phil Whitley in: The Tea Room
Phil Whitley
Started by: Ron Colvin in: CAD – Technical drawing & design
blowlamp
Started by: Michael Gilligan in: Manual machine tools
old mart
Started by: Dalboy in: Materials
Pete
Started by: blowlamp in: CAD – Technical drawing & design
Andy Stopford
Started by: Paul Mills 4 in: Model Engineer.
JA
Started by: ian Holdsworth in: Beginners questions
Oldiron
Started by: Graeme Seed in: Workshop Tools and Tooling
Chris Gunn
Started by: Speedy Builder5 in: Workshop Tools and Tooling
Speedy Builder5
Started by: Graham Meek in: Manual machine tools
Graham Meek
Started by: Geoff Byman in: Beginners questions
Geoff Byman
Started by: IanT in: Workshop Tools and Tooling
Geoff Dunsby
Started by: David George 1 in: Workshop Tools and Tooling
Started by: Chris Kirby 1 in: Help and Assistance! (Offered or Wanted)
Chris Kirby 1
View full reply list.