Oiling a Brook Compton Parkinson electric motor on a myford lathe

Oiling a Brook Compton Parkinson electric motor on a myford lathe

This topic has 2 replies, 2 voices, and was last updated 4 March 2018 at 23:01 by Brian Sweeting 2.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
4 March 2018 at 22:36 #344451
Norboy
Participant
@norboy
The motor on my Super 7 has an oil cap for lubrication. I cannot find any instructions on how often it should be oiled. The factory that made these smaller motors was apparently spun off from the parent company over 20 years ago and went out of business in the 90’s. Any informed advice much appreciated.

Cheers, Alan.
Advert

4 March 2018 at 22:36 #25858
Norboy
Participant
@norboy
General questions
4 March 2018 at 23:01 #344452
Brian Sweeting 2
Participant
@briansweeting2
A couple of drops now and again should be okay, the oil keeps a felt ring lubricated.

This Indestructable may be useful.

http://www.instructables.com/id/Dismantling-a-Brook-Crompton-AC-motor-from-a-Myfo/

**LINK**
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Anti Virus software
  Started by: Andrew Crow in: The Tea Room
- 16
- 19
- 8 June 2025 at 23:35
  Paul Lousick
- Chester Champion mill 3 phase questions
  Started by: martian in: Electronics in the Workshop
- 9
- 12
- 8 June 2025 at 23:25
  Nicholas Farr
- Making ARC’s ‘Versatile Milling Vise’ a little more versatile.
  Started by: samuel heywood in: Workshop Tools and Tooling
- 9
- 11
- 8 June 2025 at 22:48
  bernard towers
- 30w low voltage PWM controller
  Started by: Michael Gilligan in: Electronics in the Workshop
- 7
- 21
- 8 June 2025 at 22:46
  John Haine
- Model Turbines 1 2 … 24 25
  Started by: Turbine Guy in: Stationary engines
- 28
- 605
- 8 June 2025 at 21:45
  Turbine Guy
- Cheap rust removing solution
  Started by: Sonic Escape in: The Tea Room
- 14
- 23
- 8 June 2025 at 20:43
  Bazyle
- Watts Precisian level
  Started by: Ian Owen NZ in: Workshop Tools and Tooling
- 5
- 6
- 8 June 2025 at 19:06
  Pete Rimmer
- Boiler Design – issue 4765 1 2 … 6 7
  Started by: Charles Lamont in: Model Engineer & Workshop
- 25
- 164
- 8 June 2025 at 18:28
  Martin Kyte
- Sieg C1 lathe autofeed and screw cutting
  Started by: Rob Athome in: Beginners questions
- 13
- 22
- 8 June 2025 at 13:19
  JasonB
- Astra Elite AR5 Grinder Instructions
  Started by: garyash in: Manual machine tools
- 1
- 2
- 8 June 2025 at 13:09
  garyash
- Work Surface Free
  Started by: Martin Dilly 2 in: Help and Assistance! (Offered or Wanted)
- 1
- 1
- 8 June 2025 at 12:37
  Martin Dilly 2
- Warco Machines for Sale
  Started by: my.dad.the.toolmaker in: Manual machine tools
- 6
- 11
- 8 June 2025 at 11:36
  my.dad.the.toolmaker
- What Did You Do Today 2025 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 30
- 134
- 8 June 2025 at 10:42
  Julie Ann
- 3″ Burrell build
  Started by: Deric in: Traction engines
- 8
- 20
- 8 June 2025 at 06:52
  JasonB
- Unusual Crow Bar Type Tool? Fire Brigade?
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 9
- 11
- 7 June 2025 at 22:34
  Tomk
- Myford service engineer
  Started by: Nic Bertelsen in: General Questions
- 1
- 1
- 7 June 2025 at 21:57
  Nic Bertelsen
- Need help choosing a lathe chuck
  Started by: th1980 in: Workshop Tools and Tooling
- 15
- 20
- 7 June 2025 at 20:57
  Dave Halford
- Quiet angle grinder 1 2
  Started by: Sonic Escape in: General Questions
- 19
- 28
- 7 June 2025 at 19:11
  Robert Atkinson 2
- First lathe – warco 180/210
  Started by: Chris12 in: Beginners questions
- 8
- 13
- 7 June 2025 at 17:18
  Nick Wheeler
- Adept shapers
  Started by: DMB in: Workshop Tools and Tooling
- 5
- 6
- 7 June 2025 at 16:30
  Frank Gorse
- A Tower Clock project 1 2
  Started by: Peter Cook 6 in: Clocks and Scientific Instruments
- 10
- 42
- 7 June 2025 at 13:13
  bernard towers
- Model dynamo drawings
  Started by: Dougie Swan in: General Questions
- 6
- 19
- 7 June 2025 at 12:51
  Dougie Swan
- Work Surface Free of Charge
  Started by: Martin Dilly 2 in: General Questions
- 1
- 1
- 7 June 2025 at 12:27
  Martin Dilly 2
- Plain bearing play
  Started by: Sonic Escape in: Beginners questions
- 5
- 8
- 7 June 2025 at 10:07
  bernard towers
- ME beam engine 1 2
  Started by: Jager in: Stationary engines
- 11
- 28
- 7 June 2025 at 10:06
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

June 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies