Looking to contract very simple work out

This topic has 1 reply, 1 voice, and was last updated 26 November 2016 at 08:09 by Timothy Box.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
26 November 2016 at 08:09 #268459
Timothy Box
Participant
@timothybox51484
Really sorry if I'm abusing any rules here or/and posting in the wrong place.

I have some paid work for any engineer with a modicum of skill. Hey if I can do ith then its not going to be that hard.

The job is really really simple. I supply 6mm tube pre machined with a small taper in one end. You knock in a M5 brass machine screw and silver solder it in.

Next cut of the screw and turn the end flat

Finally drill a hole in the end (equal amounts of 0.4,0.6 and 0.8mm)

All parts supplied, Well paid on a per piece basis. Batches of around 100.

Now I have made 1,000s and can continue to make 1,000's but I'm busy and this just one of a load of jobs. Time is short…

Thanks

Tim
Advert

26 November 2016 at 08:09 #24901
Timothy Box
Participant
@timothybox51484
Paid work on offer suit just about any engineer with time on hands.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Silver solder.
  Started by: Michael Callaghan in: General Questions
- 9
- 10
- 9 October 2026 at 02:47
  Speedy Builder5
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 6
- 11
- 9 October 2026 at 02:36
  Michael Gilligan
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 19
- 23
- 9 October 2026 at 00:49
  Nigel Graham 2
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 20
- 54
- 9 October 2026 at 00:33
  Nigel Graham 2
- Dore Boring Bar set
  Started by: Andrew Tinsley in: General Questions
- 2
- 2
- 9 October 2026 at 00:15
  Nigel Graham 2
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 2
- 3
- 8 October 2026 at 23:07
  starjump
- Triangular Insert Tool
  Started by: James A in: Workshop Tools and Tooling
- 10
- 15
- 8 October 2026 at 22:48
  Bill Phinn
- Angled d-bit / machinist reamer?
  Started by: Fulmen in: Workshop Tools and Tooling
- 6
- 10
- 8 October 2026 at 22:41
  Bazyle
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 10
- 8 October 2026 at 20:30
  Dominic Bramley
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 5
- 7
- 8 October 2026 at 20:04
  Bazyle
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 3
- 3
- 8 October 2026 at 19:34
  not done it yet
- Gears
  Started by: Franco Convertini in: General Questions
- 8
- 13
- 8 October 2026 at 19:07
  Howard Lewis
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 2
- 4
- 8 October 2026 at 18:56
  JasonB
- Hello Everyone (New Member Introduction)
  Started by: cedricvale in: Introduce Yourself – New members start here!
- 5
- 5
- 8 October 2026 at 18:47
  Howard Lewis
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 4
- 4
- 8 October 2026 at 18:43
  Howard Lewis
- Canterbury lamb
  Started by: Michael Callaghan in: General Questions
- 3
- 3
- 8 October 2026 at 17:55
  noel shelley
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 5
- 7
- 8 October 2026 at 17:00
  andrew998
- Parkside Electronics
  Started by: Clive Steer in: General Questions
- 8
- 22
- 8 October 2026 at 13:12
  shayodon
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 7
- 17
- 8 October 2026 at 12:03
  IanT
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 53
- 205
- 8 October 2026 at 11:44
  bernard towers
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 1
- 1
- 7 October 2026 at 20:05
  chris1984
- A nice Lidl improvement … ULGD 5.0 E4
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 3
- 7 October 2026 at 19:07
  peak4
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 9
- 21
- 7 October 2026 at 17:16
  jon hill 3
- Current Thoughts on 3 Phase Smart Meters
  Started by: Colin Heseltine in: The Tea Room
- 5
- 5
- 7 October 2026 at 16:28
  howardb
- Where is it all going? Claude – CAD – product
  Started by: Mike Hurley in: CAD – Technical drawing & design
- 9
- 15
- 7 October 2026 at 13:57
  David Senior

Looking to contract very simple work out

Looking to contract very simple work out

Latest Replies

Latest Issue

October 2026

Newsletter Sign-up

Latest Replies