Under lathe material storage system

Under lathe material storage system

This topic has 1 reply, 1 voice, and was last updated 12 June 2019 at 21:39 by robert eggleston.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
12 June 2019 at 21:39 #413985
robert eggleston
Participant
@roberteggleston16335
Here is my most recent bar stock storage system using trays that are 8×24" inside to accommodate 24" length or less lengths of various bar stock materials and shapes I utilize.

Edited By robert eggleston on 12/06/2019 21:41:48
Advert

12 June 2019 at 21:39 #19372
robert eggleston
Participant
@roberteggleston16335
Handy material storage system for bar stock
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Cylindrical Grinding Attachment
  Started by: Shaun Churchill in: General Questions
- 7
- 23
- 16 September 2026 at 14:09
  Peter Neill 1
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 5
- 5
- 16 September 2026 at 13:44
  Michael Gilligan
- Have I got 12-28 UNF wrong or has Völkel? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 26
- 16 September 2026 at 13:11
  JasonB
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 5
- 6
- 16 September 2026 at 12:52
  DC31k
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 11
- 16 September 2026 at 11:08
  John Haine
- Pittler C3 lathe, dividing and gear cutting attachments
  Started by: vic newey in: Workshop Tools and Tooling
- 4
- 5
- 16 September 2026 at 10:10
  vic newey
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 8
- 12
- 16 September 2026 at 08:56
  roy entwistle
- REVERSE-ROTATION R/C Propellers…
  Started by: Andre ROUSSEAU in: Help and Assistance! (Offered or Wanted)
- 2
- 4
- 16 September 2026 at 08:22
  JasonB
- Photography in the workshop (for the inept) 1 2
  Started by: Pippin in: Workshop Techniques
- 20
- 35
- 16 September 2026 at 00:03
  Nigel Graham 2
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 6
- 9
- 15 September 2026 at 23:24
  blowlamp
- Microscope eyepieces
  Started by: gerry madden in: Clocks and Scientific Instruments
- 3
- 7
- 15 September 2026 at 23:20
  gerry madden
- 3 phase supply (again) 1 2 3
  Started by: colin hamilton in: General Questions
- 22
- 56
- 15 September 2026 at 23:04
  thetinkerer210
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 20
- 15 September 2026 at 20:26
  Wade Beatty
- Robinson scale engine
  Started by: Frank Waugh in: Stationary engines
- 2
- 2
- 15 September 2026 at 18:49
  JasonB
- New to castings
  Started by: BOB BLACKSHAW 1 in: Workshop Techniques
- 4
- 8
- 15 September 2026 at 18:06
  JasonB
- Do you chase a galvanized thread, or leave it alone?
  Started by: elowen01 in: Workshop Tools and Tooling
- 6
- 8
- 15 September 2026 at 16:49
  noel shelley
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 13
- 16
- 15 September 2026 at 16:42
  Graham Meek
- Myford ML7 Motor
  Started by: ian Holdsworth in: Manual machine tools
- 4
- 4
- 15 September 2026 at 09:57
  Michael Gilligan
- Octopus Heat Pump 1 2 3
  Started by: Michael Gilligan in: The Tea Room
- 20
- 63
- 15 September 2026 at 09:46
  Michael Gilligan
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 2
- 3
- 15 September 2026 at 08:40
  bernard towers
- 4¾” 13swg copper tubing?
  Started by: martynt50 in: Materials
- 8
- 10
- 14 September 2026 at 22:36
  Mick Bailey
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 15
- 14 September 2026 at 21:57
  Mike Crossfield
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 13
- 14 September 2026 at 21:34
  John Purdy
- Revolution – The Future is Out There!
  Started by: JasonB in: Stationary engines
- 3
- 5
- 14 September 2026 at 20:50
  JA
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 2
- 2
- 14 September 2026 at 20:15
  Roger B

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies