Burnherd multi size collet chuck info

This topic has 1 reply, 1 voice, and was last updated 5 October 2015 at 20:02 by Ajohnw.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
5 October 2015 at 20:02 #206757
Ajohnw
Participant
@ajohnw51620
While tidying up this has surfaced again. It's the lever operated type with a max capacity of 1in.

Problem – I lack the installation instructions can any one help?

For some of the chucks they give dimensions for where the pivot on the end of the lever needs to be located. I've not had much luck finding anything on this model which is the one Myford usually supplied. I need to mount it on a Boxford though so the attachment Myford provided for the lever to operate against wouldn't be of much use. Boxford appear to have used something which is held in place by 2 screws on the lower front face of the headstock so the lever would have been vertical. Other lathes used an attachment fastened to the bed and Burnherd provided sufficient info to determine where the pivot point should be. That is what I ideally need for the 1" max chuck.

John

–
Advert

5 October 2015 at 20:02 #17850
Ajohnw
Participant
@ajohnw51620
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What is this?
  Started by: Sonic Escape in: General Questions
- 10
- 14
- 11 July 2026 at 16:34
  Wade Beatty
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 14
- 24
- 11 July 2026 at 16:15
  Julie Ann
- SmallRig Cheese Plate
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 2
- 3
- 11 July 2026 at 14:56
  Michael Gilligan
- Another what’s this thread….
  Started by: Hollowpoint in: General Questions
- 1
- 1
- 11 July 2026 at 14:33
  Hollowpoint
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 12
- 22
- 11 July 2026 at 14:27
  Ches Green UK
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 53
- 11 July 2026 at 13:57
  Adam Harris
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 5
- 6
- 11 July 2026 at 13:11
  JasonB
- Metal saw
  Started by: Speedy Builder5 in: Workshop Techniques
- 2
- 2
- 11 July 2026 at 12:49
  Clive Foster
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 53
- 11 July 2026 at 12:34
  Dave Halford
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 12
- 11 July 2026 at 10:03
  JasonB
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 7
- 7
- 11 July 2026 at 09:17
  Bazyle
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 136
- 11 July 2026 at 08:51
  Nicholas Farr
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 5
- 10 July 2026 at 21:37
  old mart
- Cotton-covered flex
  Started by: Kiwi Bloke in: Materials
- 9
- 10
- 10 July 2026 at 20:03
  howardb
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 22
- 10 July 2026 at 19:39
  Clive Steer
- Farm Boy – Drawing 11
  Started by: Speedy Builder5 in: I/C Engines
- 4
- 4
- 10 July 2026 at 17:15
  John Purdy
- When is a new 90 degree drill not 90 degrees? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 21
- 49
- 10 July 2026 at 16:48
  Nicholas Farr
- BridgePort Interact 1 Mk2 parameters
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:31
  tomcnc
- Bridgeport Interact 1 Mark 2 circuit diagrams
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:16
  tomcnc
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 5
- 5
- 9 July 2026 at 20:27
  Wade Beatty
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 12
- 18
- 9 July 2026 at 19:08
  Michael Gilligan
- Transformer question
  Started by: Wade Beatty in: Electronics in the Workshop
- 3
- 5
- 9 July 2026 at 17:30
  Robert Atkinson 2
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 66
- 9 July 2026 at 11:47
  KEITH BEAUMONT
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 11
- 8 July 2026 at 22:27
  alecs
- Flat Surface 1 2 3 4
  Started by: COLIN MARTIN 2 in: Materials
- 36
- 77
- 7 July 2026 at 23:34
  alecs

Burnherd multi size collet chuck info

Burnherd multi size collet chuck info

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies