5c length

5c length

This topic has 7 replies, 3 voices, and was last updated 12 August 2015 at 05:59 by mick70.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
8 August 2015 at 08:48 #17797
mick70
Participant
@mick70
Advert

8 August 2015 at 08:48 #199642
mick70
Participant
@mick70
got what i assume is a collet holder with my clarkson.

id matches dia of 5c collet on arc site.

but doesn't give length of holder is 3" would that be right for 5c collet?

cheers
8 August 2015 at 11:03 #199652
Ketan Swali
Participant
@ketanswali79440
See below: Measurements in mm. Also in Album in case you cannot read the measurements from the picture below.

Ketan at ARC.
8 August 2015 at 11:19 #199654
mick70
Participant
@mick70
looks like it should fit, just ordered one to try if it does will get more.

will need to make drawbar for it first.
8 August 2015 at 12:18 #199661
Bazyle
Participant
@bazyle
no, the clarkson standard universal head does not have the taper part for a 5c. They are just custom sleeves. Since milling cutters only come in a smzall number of shank sizes. If your head does have a taper it has been specially made so you may be in luck.

If you follow the link i gave onyour first clarkson thread it has lots of pictures of the correct parts and i think some dimensions
8 August 2015 at 12:36 #199665
mick70
Participant
@mick70
Bazyle link was very useful.

this is sleeve someone made for it at some point.
12 August 2015 at 05:59 #200089
mick70
Participant
@mick70
Finally bit of luck after bad week the 5c collet fits perfectly.
12 August 2015 at 05:59 #200090
mick70
Participant
@mick70
Finally bit of luck after bad week the 5c collet fits perfectly.
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 9
- 16
- 10 July 2026 at 23:12
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 134
- 10 July 2026 at 22:48
  Nigel Graham 2
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 10
- 10 July 2026 at 21:38
  Russell Eberhardt
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 5
- 10 July 2026 at 21:37
  old mart
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 5
- 5
- 10 July 2026 at 20:16
  Mark Rand
- Cotton-covered flex
  Started by: Kiwi Bloke in: Materials
- 9
- 10
- 10 July 2026 at 20:03
  howardb
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 22
- 10 July 2026 at 19:39
  Clive Steer
- Farm Boy – Drawing 11
  Started by: Speedy Builder5 in: I/C Engines
- 4
- 4
- 10 July 2026 at 17:15
  John Purdy
- When is a new 90 degree drill not 90 degrees? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 21
- 49
- 10 July 2026 at 16:48
  Nicholas Farr
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 3
- 3
- 10 July 2026 at 15:07
  lukeama123
- BridgePort Interact 1 Mk2 parameters
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:31
  tomcnc
- Bridgeport Interact 1 Mark 2 circuit diagrams
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:16
  tomcnc
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 5
- 5
- 9 July 2026 at 20:27
  Wade Beatty
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 12
- 18
- 9 July 2026 at 19:08
  Michael Gilligan
- Transformer question
  Started by: Wade Beatty in: Electronics in the Workshop
- 3
- 5
- 9 July 2026 at 17:30
  Robert Atkinson 2
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 52
- 9 July 2026 at 12:47
  teamricky
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 66
- 9 July 2026 at 11:47
  KEITH BEAUMONT
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 11
- 8 July 2026 at 22:27
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 13
- 22
- 8 July 2026 at 10:48
  lucerne
- Flat Surface 1 2 3 4
  Started by: COLIN MARTIN 2 in: Materials
- 36
- 77
- 7 July 2026 at 23:34
  alecs
- Hello from new USA member
  Started by: grizmaster in: Introduce Yourself – New members start here!
- 3
- 3
- 7 July 2026 at 22:47
  noel shelley
- McLaren 1,5 inch scale Modl Traction Engine
  Started by: Mike Cooke in: General Questions
- 1
- 1
- 7 July 2026 at 20:08
  Mike Cooke
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 8
- 14
- 7 July 2026 at 19:29
  Speedy Builder5
- Readability / clarity in new combined magazine 1 2
  Started by: Trevor Gale in: Model Engineer & Workshop
- 19
- 35
- 7 July 2026 at 18:24
  JasonB
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 29
- 75
- 7 July 2026 at 14:02
  Bazyle

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies