Boxford 280

This topic has 5 replies, 3 voices, and was last updated 25 August 2020 at 09:53 by Andy Sproule.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
23 August 2020 at 20:33 #492191
Andy Sproule
Participant
@andysproule22368
Hi.on a boxford 280 at the headstock the direction lever for the lead screw and the speed levers for the lead screw does the machine have to be turned off to change them?The powerfeed leavers on the apron does the motor have to be turned off to change them?
Advert

23 August 2020 at 20:33 #14008
Andy Sproule
Participant
@andysproule22368
24 August 2020 at 09:37 #492255
not done it yet
Participant
@notdoneityet
I would not be changing direction, or speeds, without the spindle at (or close to) stationary ( nor under power at the time). I always select the power feed mode before running the lathe, but engaging/disengaging is clearly carried out while the lathe is running. Not a Boxford, but the principle is the same.
24 August 2020 at 15:41 #492325
Andy Sproule
Participant
@andysproule22368
**LINK**

Thanks for reply I have always stopped the machine but seen this guy doing it with the machine running and wondered what you guys thought?
24 August 2020 at 16:16 #492332
Tim Stevens
Participant
@timstevens64731
Remember that on many machines the motor can be running but not driving anything – just like a car in neutral. Until you are clear about the full working of your Boxford it would be safer to stop the motor before waggling levers.

Regards, Tim
25 August 2020 at 09:53 #492451
Andy Sproule
Participant
@andysproule22368
Thanks for that Tim.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 5
- 8
- 14 July 2026 at 22:36
  noel shelley
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 14
- 17
- 14 July 2026 at 21:17
  vintagengineer
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 12
- 49
- 14 July 2026 at 20:02
  Graham Meek
- What is this? 1 2
  Started by: Sonic Escape in: General Questions
- 18
- 26
- 14 July 2026 at 19:52
  Andy Stopford
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 13
- 14 July 2026 at 19:30
  Graeme Seed
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD! 1 2
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 19
- 46
- 14 July 2026 at 17:40
  Neil A
- QCTP 1 2
  Started by: James A in: Workshop Tools and Tooling
- 19
- 30
- 14 July 2026 at 17:00
  Diogenes
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 9
- 14 July 2026 at 14:53
  old mart
- Bonding brass hubs to steel
  Started by: mikemunson in: Beginners questions
- 3
- 4
- 14 July 2026 at 11:27
  Michael Gilligan
- Lathe coolant applicators 1 2
  Started by: lucerne in: Manual machine tools
- 16
- 30
- 14 July 2026 at 09:15
  Julie Ann
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 58
- 14 July 2026 at 01:49
  seemack
- Small electromagnetic pump via E-Bay
  Started by: Clive Foster in: Manual machine tools
- 5
- 8
- 13 July 2026 at 20:02
  John Hinkley
- Windows 11 background pictures
  Started by: old mart in: The Tea Room
- 4
- 4
- 13 July 2026 at 19:49
  Mark Rand
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 139
- 13 July 2026 at 17:58
  duncan webster 1
- pitman arm
  Started by: martin haysom in: General Questions
- 6
- 9
- 13 July 2026 at 17:00
  Dave Halford
- Martin Cleeve Swing Clear Retracting Toolholder 1 2
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 18
- 27
- 13 July 2026 at 15:21
  ega
- Boiler problem
  Started by: Zan in: Help and Assistance! (Offered or Wanted)
- 5
- 8
- 13 July 2026 at 14:25
  Zan
- First Printer
  Started by: vintagengineer in: 3D Printers and 3D Printing
- 7
- 8
- 13 July 2026 at 13:47
  John Haine
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 7
- 12
- 13 July 2026 at 08:28
  Dell
- Cleaning years of nicotine exposure and some touch ups
  Started by: rumz in: Traction engines
- 5
- 6
- 12 July 2026 at 18:00
  Georgineer
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 23
- 12 July 2026 at 12:00
  Howard Lewis
- Metal saw
  Started by: Speedy Builder5 in: Workshop Techniques
- 4
- 4
- 12 July 2026 at 10:25
  martin haysom
- SmallRig Cheese Plate
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 4
- 10
- 12 July 2026 at 10:05
  Michael Gilligan
- Another what’s this thread….
  Started by: Hollowpoint in: General Questions
- 6
- 9
- 11 July 2026 at 23:48
  Nigel Graham 2
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 7
- 8
- 11 July 2026 at 19:34
  Mark Rand

Boxford 280

Boxford 280

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies