Top slide angle

This topic has 4 replies, 2 voices, and was last updated 10 December 2011 at 12:06 by Nobby.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
7 September 2011 at 22:48 #74662
Nobby
Participant
@nobby
Why is the top slide at an angle ? Am I missing something

Nobby
Advert

7 September 2011 at 22:48 #11817
Nobby
Participant
@nobby
6 December 2011 at 23:24 #79366
Steve Withnell
Participant
@stevewithnell34426
It’s a while back now. I think it was to do with getting enough movement on the cross slide. I normally have the topslide offset at 6 degrees, to give a x10 on the topslide dial, ie the feed is 0.0025mm/div instead of 0,025mm as calibrated.

I had to do the same thing when I turned the flywheel for the Victoria, I had to swing the top slide right round to get the tool to the edge of the work.

Steve
10 December 2011 at 12:04 #79635
Nobby
Participant
@nobby
Hi Steve

Thank’s .It looks great plunging in from the front with no support . There’s the problem in my point of view is pitching the spacing off the grooves is there DRO on your lathe?

Regards Nobby
10 December 2011 at 12:06 #79636
Nobby
Participant
@nobby
Whoops I missed the fixed steady

Its my age

Nobby
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Boring Bars?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 6
- 7
- 29 October 2026 at 17:07
  Grindstone Cowboy
- AI Bringing Engines to Life
  Started by: JasonB in: The Tea Room
- 11
- 16
- 29 October 2026 at 16:56
  Grindstone Cowboy
- Drummond M-Type 3.5-inch metal-turning bench lathe
  Started by: davidsewell in: Beginners questions
- 6
- 10
- 29 October 2026 at 13:16
  davidsewell
- Single Phase Motor Soft Start 1 2
  Started by: Bob Sillitoe in: General Questions
- 11
- 26
- 29 October 2026 at 10:56
  Roderick Jenkins
- Feed pump identification
  Started by: David Ambrose in: Miscellaneous models
- 4
- 4
- 29 October 2026 at 10:28
  Clive Foster
- Newbie
  Started by: bryansmith1983 in: Introduce Yourself – New members start here!
- 4
- 5
- 29 October 2026 at 09:19
  noel shelley
- New member
  Started by: cedricvale in: Introduce Yourself – New members start here!
- 5
- 5
- 29 October 2026 at 07:45
  Howard Lewis
- My EMCO FB-2
  Started by: Ger in: Manual machine tools
- 4
- 6
- 28 October 2026 at 22:51
  JohnF
- A first for ME&W 1 2 3
  Started by: Andrew Tinsley in: Model Engineer.
- 26
- 66
- 28 October 2026 at 22:11
  Pippin
- Making a Solid Rubber Tyre
  Started by: William Harvey 1 in: Help and Assistance! (Offered or Wanted)
- 13
- 21
- 28 October 2026 at 20:21
  Martin Johnson 1
- Galvanized nut binds halfway down — where would you start?
  Started by: elowen01 in: General Questions
- 8
- 8
- 28 October 2026 at 17:06
  JasonB
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 129
- 28 October 2026 at 17:04
  Niels Abildgaard
- Warco milling machines table size
  Started by: aytact in: Manual machine tools
- 5
- 6
- 28 October 2026 at 15:41
  Dalboy
- Stuart twin compound
  Started by: teamricky in: Stationary engines
- 5
- 24
- 28 October 2026 at 10:41
  teamricky
- Axminster Tools – New Website
  Started by: Nigel Graham 2 in: Manual machine tools
- 5
- 5
- 28 October 2026 at 09:42
  Vic
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 17
- 23
- 28 October 2026 at 09:04
  elowen01
- 5″ loco support jig
  Started by: Peter Venn in: General Questions
- 8
- 13
- 28 October 2026 at 06:37
  Speedy Builder5
- Hydrostatic Transmission by Mike Tilby
  Started by: Ronald Wagner in: Model Engineer & Workshop
- 8
- 15
- 27 October 2026 at 23:09
  duncan webster 1
- injector operation
  Started by: Garry Coles in: General Questions
- 7
- 11
- 27 October 2026 at 22:05
  Nigel Graham 2
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 14
- 25
- 27 October 2026 at 20:07
  JasonB
- SolidCraft Features.
  Started by: blowlamp in: CAD – Technical drawing & design
- 4
- 6
- 27 October 2026 at 18:06
  blowlamp
- Emco FB2 Quirks and Additions 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 21
- 104
- 27 October 2026 at 12:28
  Graham Meek
- Myford VMB mill
  Started by: lctikka61 in: Manual machine tools
- 2
- 2
- 27 October 2026 at 09:47
  John Haine
- Mystery milling machine quick change tool
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 26 October 2026 at 22:42
  Rainbows
- Change old AC motor to BLDC motor in Sieg C6 1 2
  Started by: Jens Eirik Skogstad 1 in: Electronics in the Workshop
- 15
- 41
- 26 October 2026 at 21:50
  Huub

Top slide angle

Top slide angle

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies