Pultra Mardrive information required

This topic has 1 reply, 1 voice, and was last updated 31 July 2013 at 14:58 by Ken Weeks.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
31 July 2013 at 14:58 #125808
Ken Weeks
Participant
@kenweeks58536
I have a Pultra Mardrive unit that I am cleaning and oiling to use with my Pultra 17/70 lathe.

The two main problems that I have are the oilers need replacing and the third pulley has been removed the lower one that feeds the drive to the upper one that drives the lathe.

I have the pulley and have found the key and nut in the assortment of bits that came with it.

Can any body help me with:-

The thread for the oilers?

Are these the same for the lathe?

Is there anything else needed to fit the pulley i.e. spacer,washers etc?

Ken
Advert

31 July 2013 at 14:58 #22743
Ken Weeks
Participant
@kenweeks58536
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 20
- 45
- 30 September 2026 at 23:27
  duncan webster 1
- Warco WM180 Autofeed Speed
  Started by: James A in: Workshop Tools and Tooling
- 4
- 6
- 30 September 2026 at 23:23
  James A
- Drilling accurate depth holes
  Started by: Bob Sillitoe in: Beginners questions
- 11
- 11
- 30 September 2026 at 22:32
  Nigel Graham 2
- PROGRESS
  Started by: Phillip weaver in: Introduce Yourself – New members start here!
- 5
- 9
- 30 September 2026 at 22:01
  Pete
- Missmatched threads
  Started by: old mart in: Hints And Tips for model engineers
- 7
- 13
- 30 September 2026 at 21:02
  old mart
- Inappropriate adverts on the site
  Started by: Joseph Noci 1 in: Website Questions, Comments, and Suggestions
- 16
- 25
- 30 September 2026 at 20:47
  JasonB
- New to castings
  Started by: BOB BLACKSHAW 1 in: Workshop Techniques
- 5
- 17
- 30 September 2026 at 20:44
  JasonB
- Octopus Heat Pump 1 2 … 4 5
  Started by: Michael Gilligan in: The Tea Room
- 25
- 118
- 30 September 2026 at 18:53
  Michael Gilligan
- Powerfeed problem
  Started by: larry phelan 1 in: Help and Assistance! (Offered or Wanted)
- 4
- 5
- 30 September 2026 at 17:04
  Macolm
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 188
- 30 September 2026 at 14:41
  bernard towers
- Linear scale caput
  Started by: petro1head in: General Questions
- 3
- 4
- 30 September 2026 at 10:26
  owenhartley
- Midlands Model Engineering Exhibition, Thursday 15th to Sunday 18th October 2026
  Started by: Meridienne Exhibitions 1 in: Exhibitions, Shows and Club Events
- 4
- 6
- 30 September 2026 at 10:03
  Meridienne Exhibitions 1
- Triangular Insert Tool
  Started by: James A in: Workshop Tools and Tooling
- 9
- 14
- 30 September 2026 at 07:56
  James A
- Portoss lathe – new to me.
  Started by: File Handle in: Beginners questions
- 4
- 7
- 30 September 2026 at 07:55
  Lee Rogers
- Taylor Hobson cutter grinder modificaton 1 2
  Started by: David George 1 in: Workshop Tools and Tooling
- 11
- 45
- 29 September 2026 at 21:55
  Colin Teasdale
- Claude et al
  Started by: Michael Gilligan in: The Tea Room
- 4
- 5
- 29 September 2026 at 19:38
  Bazyle
- Warco VMC start capacitor
  Started by: Durhambuilder in: Electronics in the Workshop
- 5
- 10
- 29 September 2026 at 12:06
  Durhambuilder
- Family Day at the museum in Großauheim near Hanau with steam
  Started by: Werner Schleidt in: Traction engines
- 2
- 2
- 29 September 2026 at 12:05
  Mike Hurley
- Model engineering’s (live steam) big five
  Started by: Luker in: Locomotives
- 7
- 16
- 29 September 2026 at 10:03
  Luker
- finding involute gear cutter 1 2
  Started by: vic newey in: Workshop Techniques
- 11
- 27
- 28 September 2026 at 17:08
  vic newey
- Model Engine Maker
  Started by: Colin Heseltine in: The Tea Room
- 4
- 8
- 28 September 2026 at 14:47
  Colin Heseltine
- End mill sharpening 1 2
  Started by: petro1head in: General Questions
- 17
- 34
- 28 September 2026 at 14:22
  petro1head
- What to do about son’s inheritance.
  Started by: Terry Nicholas in: General Questions
- 2
- 2
- 28 September 2026 at 13:39
  bernard towers
- Wired doorbell to wireless
  Started by: Another JohnS in: General Questions
- 9
- 14
- 28 September 2026 at 12:17
  renardiere7
- Sharing some grinding blades I’m currently using
  Started by: hclmetal2026 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 4
- 28 September 2026 at 09:48
  hclmetal2026

Pultra Mardrive information required

Pultra Mardrive information required

Latest Replies

Latest Issue

October 2026

Newsletter Sign-up

Latest Replies