New member from Kentucky

[Greg GordonParticipant @greggordon49076]

Hello,

I just joined this forum. I have always been interested in model engineering. I have been a machinist or taught machine shop for the past 25 years or so.

There's not much interest in model engineering around here so I have to rely on books and the internet to keep up with the latest.

I also dabble with mechanical watch repair and ham radio (Callsign: KX4VI)

Greg

[Greg GordonParticipant @greggordon49076]

[SteviegtrParticipant @steviegtr]

Hello Greg & welcome to the forum. Amazing , it does not matter how far away you are with the Internet.

Steve.

[Harry WilkesParticipant @harrywilkes58467]

Welcome to the forum from the West Midlands in the UK

H

[David George 1Participant @davidgeorge1]

Hi Greg welcome to the forum. What models do you make I make anything from tooling to steam engines at the moment but also make a bit of jewelry. Ask on here and someone will have an answer there is a helpful bunch here.

David

[Jon LawesParticipant @jonlawes51698]

Welcome Greg

[old martParticipant @oldmart]

Welcome, Greg you will find lots of model enthusiasts on this forum. Only yesterday, we had a new member from Texas, Alin, who is a welder. You would also find some model makers on the "Home Shop Machinist " forum, if you are not already a member.

[Greg GordonParticipant @greggordon49076]

Thank you all for the welcome. The only thing I have completed is a simple flywheel farm engine designed by Hamilton Upshur. It runs well and I am pleased with it. I built it about 17 years ago. I also started on a Jemma 7 cylinder radial several years back. Completed the crankcase, cylinders, cylinder heads, crankshaft, con rods, pistons, and cams. I don't have a milling machine at home and don't want to use the ones at work since I am tired and ready to come home at the end of the day.

So for now I'll just live vicariously through you guys and contribute where I can, especially in the machining techniques forum.

Greg

[Author]

Posts