Stronger Filament

[Grindstone CowboyParticipant @grindstonecowboy]

To be honest, angle plates must be one of the easiest things to draw in CAD, so if you are wanting to learn CAD it would be a good first project.

Rob

[Tony Pratt 1Participant @tonypratt1]

Slightly off topic but if you have a computer do yourself a favour and download Bambu Studio to that, I personally wouldn’t use a phone to control a printer if other options are available, I find a PC screen/keyboard etc so much more user friendly.

Tony

[BOB BLACKSHAW 1Participant @bobblackshaw1]

Success, cant be done on your phone, I had to down load on my computer the APP then it gave me the full access.

Thanks all again, Bob

[Dave SParticipant @daves59043]

If you glue stick the bed then after printing a soak in warm water will let you get even very delicate items off with little to no force

 

Dave

[John HaineParticipant @johnhaine32865]

On the Bambu there’s no need for glue stick or tape, just allowing the bed & print to cool and then slightly flexing the plate usually pops it off.  Sometimes a little gentle persuasion with the bed scraper tool (2nd project) is needed.

[Dave SParticipant @daves59043]

I have an X1C. I still glue for delicate prints. YMMV

Dave

[Author]

Posts