Hello from West London

[Charl TintingerParticipant @charltintinger10068]

Hi all, long time CNC enthusiast, own a few machines, Harrison M300 CNC conversion, Thor (concrete CNC mill, DIY job), smaller S&B South Bend 9 copy …..

Always looking for more stuff.

[Charl TintingerParticipant @charltintinger10068]

[Neil WyattModerator @neilwyatt]

Welcome to the forum Charl,

I'm sure we would all like to know more about your homebrew kit!

Neil

[Charl TintingerParticipant @charltintinger10068]

My build thread for Thor.

http://www.mycncuk.com/threads/9616-Thor-or-should-that-be-Zeus?highlight=thor

Roughly 2 tons of concrete, 6.8KW HSD spindle.

This is an early test cut just after I installed the spindle. Need to do a bit more tidying on the machine, will use it in a bit more anger now.

Some pics of the build and others here:-

The Harrison M300 I have done with Centroid Acorn including ATC, almost complete.

More stuff on my Youtube channel here –

https://www.youtube.com/channel/UCLACknKKQ_yK1pxCBeHpfpA

[Charl TintingerParticipant @charltintinger10068]

This is whilst it was being built.

[Neil WyattModerator @neilwyatt]

Are you sure that reference angle plate was big enough for the job?

Neil

[Charl TintingerParticipant @charltintinger10068]

Biggest I have, sadly

Didnt cover the full length but it was the largest I could get realistically.

[Author]

Posts