hello

hello

This topic has 4 replies, 4 voices, and was last updated 17 December 2018 at 13:06 by Neil Wyatt.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
16 December 2018 at 22:57 #386033
Sebastian York
Participant
@sebastianyork93348
hi guys.

new guy saying hello, joined to gleam technical info and knowledge from all, and maybe share some if I can.

happy engineering all

yorkierm
Advert

16 December 2018 at 22:57 #40449
Sebastian York
Participant
@sebastianyork93348
newbie to the forum
17 December 2018 at 06:54 #386049
Brian H
Participant
@brianh50089
Hello Sebastian and welcome. If you need any information or clarification you have but to ask and someone will be along with an answer.

Brian
17 December 2018 at 07:26 #386052
David George 1
Participant
@davidgeorge1
Hi Sebastian welcome to the forum where are you based and what are you interested in.

David
17 December 2018 at 13:06 #386093
Neil Wyatt
Moderator
@neilwyatt
Welcome to the forum, Sebastian.

Neil
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Harrison L5 mk2 or not
  Started by: sean logie in: Workshop Tools and Tooling
- 1
- 1
- 20 September 2026 at 09:04
  sean logie
- Mini lathes I need to look into
  Started by: mcenhillk in: Manual machine tools
- 14
- 18
- 20 September 2026 at 08:06
  Dell
- Doobells
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 20 September 2026 at 06:56
  Michael Gilligan
- End mill sharpening 1 2
  Started by: petro1head in: General Questions
- 16
- 32
- 19 September 2026 at 23:30
  Nigel Graham 2
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 332
- 19 September 2026 at 19:24
  Phil Whitley
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 3
- 4
- 19 September 2026 at 18:02
  File Handle
- … I had hoped we were growing-out of this nonsense ! 1 2
  Started by: Michael Gilligan in: The Tea Room
- 21
- 28
- 19 September 2026 at 17:37
  Howard Lewis
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 88
- 19 September 2026 at 16:30
  Macolm
- New Myford 7 DRO article
  Started by: Bob Worsley in: Electronics in the Workshop
- 7
- 20
- 19 September 2026 at 14:09
  Michael Gilligan
- Suzanne
  Started by: Steve Huckins in: Work In Progress and completed items
- 4
- 6
- 19 September 2026 at 14:06
  Dalboy
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 28
- 19 September 2026 at 12:16
  John Haine
- Machining inserts part numbers
  Started by: JA in: Workshop Tools and Tooling
- 6
- 8
- 19 September 2026 at 10:15
  JA
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 8
- 12
- 18 September 2026 at 22:41
  Kiwi Bloke
- Maxcut 5 – Arc Euro Trade
  Started by: Phil S in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 22:32
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 184
- 18 September 2026 at 20:26
  Neil Wyatt
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 15
- 18 September 2026 at 19:28
  JasonB
- Tom Thumb Toolpost Grinder
  Started by: Phil P in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 15:30
  John Haine
- Sherline closing down
  Started by: Peter Cook 6 in: Manual machine tools
- 8
- 20
- 18 September 2026 at 13:04
  Peter Cook 6
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 31
- 18 September 2026 at 12:55
  Neil Wyatt
- Building a 4″ traction engine
  Started by: Karl Tear in: Traction engines
- 11
- 24
- 18 September 2026 at 11:41
  Nigel Graham 2
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 14
- 28
- 18 September 2026 at 07:10
  Dave Wootton
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 7
- 17 September 2026 at 20:55
  sean logie
- Have I got 12-28 UNF wrong or has Völkel? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 30
- 17 September 2026 at 19:12
  peak4
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 6
- 9
- 17 September 2026 at 18:54
  John Haine
- Thread info required for the TEMU hydraulic pressure tester
  Started by: Greensands in: General Questions
- 10
- 17
- 17 September 2026 at 18:28
  duncan webster 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies