Hello

Hello

This topic has 6 replies, 6 voices, and was last updated 13 August 2018 at 15:27 by David George 1.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
13 August 2018 at 11:18 #367058
Tim Nolting
Participant
@timnolting
Hi from Verne. That's in the Hoosier state, US.

This looks like an interesting site. Hope I can learn something.
Advert

13 August 2018 at 11:18 #40367
Tim Nolting
Participant
@timnolting
13 August 2018 at 11:47 #367068
Ian S C
Participant
@iansc
Hi Tim, I;m sure you will learn a bit here, there's blokes/guys here from all over the planet, each problem will have a number of answers, the right one will be there.

Ian S C
13 August 2018 at 12:15 #367074
Jon Lawes
Participant
@jonlawes51698
Welcome!
13 August 2018 at 12:21 #367076
Neil Wyatt
Moderator
@neilwyatt
Welcome to the fourum Tim,

Neil
13 August 2018 at 12:36 #367078
Brian H
Participant
@brianh50089
Hello Tim and welcome. If you have any questions, ask away, there's bound to be someone on here with the answer, sometimes even the correct one!.

Brian
13 August 2018 at 15:27 #367096
David George 1
Participant
@davidgeorge1
Hi Tim welcome to the forum what are your particular interests in. plenty of help for any type of model and machinery here.

David
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 15
- 18 September 2026 at 19:28
  JasonB
- Octopus Heat Pump 1 2 3
  Started by: Michael Gilligan in: The Tea Room
- 22
- 72
- 18 September 2026 at 19:28
  Bazyle
- Machining inserts part numbers
  Started by: JA in: Workshop Tools and Tooling
- 4
- 5
- 18 September 2026 at 19:20
  old mart
- End mill sharpening 1 2
  Started by: petro1head in: General Questions
- 16
- 27
- 18 September 2026 at 19:16
  old mart
- New Myford 7 DRO article
  Started by: Bob Worsley in: Electronics in the Workshop
- 1
- 1
- 18 September 2026 at 18:42
  Bob Worsley
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 18
- 23
- 18 September 2026 at 17:03
  Howard Lewis
- Tom Thumb Toolpost Grinder
  Started by: Phil P in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 15:30
  John Haine
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 26
- 18 September 2026 at 13:37
  duncan webster 1
- Sherline closing down
  Started by: Peter Cook 6 in: Manual machine tools
- 8
- 20
- 18 September 2026 at 13:04
  Peter Cook 6
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 31
- 18 September 2026 at 12:55
  Neil Wyatt
- Building a 4″ traction engine
  Started by: Karl Tear in: Traction engines
- 11
- 24
- 18 September 2026 at 11:41
  Nigel Graham 2
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 14
- 28
- 18 September 2026 at 07:10
  Dave Wootton
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 7
- 17 September 2026 at 20:55
  sean logie
- Have I got 12-28 UNF wrong or has Völkel? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 30
- 17 September 2026 at 19:12
  peak4
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 6
- 9
- 17 September 2026 at 18:54
  John Haine
- Thread info required for the TEMU hydraulic pressure tester
  Started by: Greensands in: General Questions
- 10
- 17
- 17 September 2026 at 18:28
  duncan webster 1
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 6
- 8
- 17 September 2026 at 18:19
  Howard Lewis
- Harry’s Steam
  Started by: harryssteam in: Introduce Yourself – New members start here!
- 4
- 6
- 17 September 2026 at 17:34
  Howard Lewis
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 35
- 17 September 2026 at 16:49
  SteveP
- Cylindrical Grinding Attachment 1 2
  Started by: Shaun Churchill in: General Questions
- 9
- 27
- 17 September 2026 at 16:40
  Trevor Drabble 1
- Midlands Model Engineering Exhibition, Thursday 15th to Sunday 18th October 2026
  Started by: Meridienne Exhibitions 1 in: Exhibitions, Shows and Club Events
- 4
- 4
- 17 September 2026 at 16:23
  noel shelley
- Parts Storage
  Started by: Dalboy in: General Questions
- 4
- 4
- 17 September 2026 at 12:56
  Nicholas Farr
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 7
- 11
- 16 September 2026 at 22:23
  Huub
- Pittler C3 lathe, dividing and gear cutting attachments
  Started by: vic newey in: Workshop Tools and Tooling
- 5
- 8
- 16 September 2026 at 21:52
  Bazyle
- Sherline closing
  Started by: Dell in: The Tea Room
- 1
- 1
- 16 September 2026 at 19:39
  Dell

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies