Emco Unimat 3 – Instruction manual, parts list and “miniature machining techniques”

This topic has 1 reply, 1 voice, and was last updated 29 December 2022 at 19:42 by Andrew F in Australia.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
29 December 2022 at 19:42 #626654
Andrew F in Australia
Participant
@andrewfinaustralia
Hi all,

Bit of digging found these –

https://emco.or.at/index.php/download/emco-bedienungs-und-serviceanleitungen/drehmaschinen/45-emco-unimat-3-en/file

http://www.vapeuretmodelesavapeur.com/telechargements/emco-unimat-3-vue-des-composants.pdf

https://archive.org/details/american-edelstaal-22637

Most emco manuals here -> https://emco.or.at/index.php/download/emco-bedienungs-und-serviceanleitungen/drehmaschinen

Might help.
(If you're a non-member, please join the forum and contribute.)

A

Edited By Andrew F in Australia on 29/12/2022 19:44:37
Advert

29 December 2022 at 19:42 #11388
Andrew F in Australia
Participant
@andrewfinaustralia
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Dreaded leaks
  Started by: waffles in: Locomotives
- 9
- 20
- 27 August 2026 at 18:44
  vintagengineer
- Myford motor playing up
  Started by: vintagengineer in: Help and Assistance! (Offered or Wanted)
- 1
- 1
- 27 August 2026 at 18:40
  vintagengineer
- Photography in the workshop (for the inept)
  Started by: Pippin in: Workshop Techniques
- 16
- 22
- 27 August 2026 at 18:35
  Howard Lewis
- How do I ream a 15mm hole on a Unimat 3 ?
  Started by: paul1956 in: Beginners questions
- 7
- 13
- 27 August 2026 at 18:12
  Howard Lewis
- Chronos closing down. 1 2 3 4
  Started by: Andrew Tinsley in: General Questions
- 36
- 82
- 27 August 2026 at 18:11
  Colin Heseltine
- New member
  Started by: donall.cullinane in: Introduce Yourself – New members start here!
- 2
- 2
- 27 August 2026 at 18:08
  Howard Lewis
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 6
- 13
- 27 August 2026 at 17:35
  rikt
- Survival Challenge TV for engineers!
  Started by: Neil Wyatt in: The Tea Room
- 14
- 24
- 27 August 2026 at 15:31
  southernchap
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 14
- 23
- 27 August 2026 at 13:57
  Ian Hewson
- What is the easiest thin steel sheet to bend without cracking?
  Started by: elowen01 in: Materials
- 5
- 5
- 27 August 2026 at 12:02
  Nicholas Farr
- Reconstruction of dimensions fom a photo…
  Started by: Robin Graham in: Beginners questions
- 8
- 15
- 27 August 2026 at 10:39
  JasonB
- I built another one …
  Started by: Mick B1 in: Work In Progress and completed items
- 3
- 3
- 27 August 2026 at 09:26
  Bo’sun
- When is a threaded insert preferable to tapping directly into aluminum?
  Started by: elowen01 in: General Questions
- 16
- 20
- 27 August 2026 at 02:59
  elowen01
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 54
- 27 August 2026 at 00:36
  David Frith
- Cutting 25 thou grooves for a couple of circlips
  Started by: Andrew Tinsley in: General Questions
- 9
- 20
- 26 August 2026 at 21:17
  Andrew Tinsley
- Taper turning attachment
  Started by: Bernard Reilly in: Workshop Tools and Tooling
- 6
- 8
- 26 August 2026 at 20:56
  Clive Foster
- Toolroom Takeover 2026
  Started by: Pippin in: The Tea Room
- 2
- 2
- 26 August 2026 at 20:40
  Michael Gilligan
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 3
- 4
- 26 August 2026 at 19:32
  Mick B1
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 44
- 51
- 26 August 2026 at 18:55
  Bill Dawes
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 3
- 7
- 26 August 2026 at 16:44
  JasonB
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 21
- 26 August 2026 at 16:10
  Derek Drover
- Scam response to advert
  Started by: Lee Rogers in: The Tea Room
- 2
- 2
- 26 August 2026 at 16:04
  Derek Drover
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 19
- 42
- 26 August 2026 at 12:50
  Howard Lewis
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 30
- 97
- 26 August 2026 at 10:47
  bernard towers
- Drill grinders/sharpeners and their capabilities
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 9
- 20
- 26 August 2026 at 09:32
  Pippin

Emco Unimat 3 – Instruction manual, parts list and “miniature machining techniques”

Emco Unimat 3 – Instruction manual, parts list and “miniature machining techniques”

Latest Replies

Latest Issue

September 2026

Newsletter Sign-up

Latest Replies