Boxford AUD – Standard Change Wheel Setup

[Mike HulmeParticipant @mikehulme12251]

Hello All,

I have just acquired an AUD which is not presently fitted with the default change wheels for screw cutting. Could anyone provide me with a list of what goes where, or better still a photo?

Many Thanks,

Mike

[Mike HulmeParticipant @mikehulme12251]

[Nicholas FarrParticipant @nicholasfarr14254]

Hi Mike, one of the best places to look is at this **LINK**

welcome to this forum.

Regards Nick.

Edited By Nicholas Farr on 26/12/2013 07:49:48

[Mike HulmeParticipant @mikehulme12251]

Thanks Nick!

Mike

[Boiler BriParticipant @boilerbri]

Hi Mike,

 

know ow your lathe , book is based on Boxford. Isbn 0 85242 557 0

 

if you search ebay etc you should find a copy.

 

Bri

Edited By Boiler Bri on 26/12/2013 09:26:47

[RobboParticipant @robbo]

Mike,

You'll probably have more specific Boxford questions, so suggest you join the Boxford Yahoo User Group at

http://groups.yahoo.com/neo/groups/BoxfordLathe-UserGroup/info

You will find a copy of "Know Your Lathe" in the Group files.

Phil

Edited By Robbo on 26/12/2013 09:39:56

[SaxalbyParticipant @saxalby]

On my AUD (Imperial) the standard set-up is:

Stud gear – 20T Idler gear – 80T Screw gear – 56 T

On a Metric AUD:

Stud gear – 20T Idler Gear – 80T Screw gear – 45T

Barry

[Mike HulmeParticipant @mikehulme12251]

Thank you all,

I joined the Boxford Group, got a copy of "Know Your Lathe" on Amazon, and can now set up my AUD.

Mike

[Author]

Posts