Stuart 800 gas engine plans

Stuart 800 gas engine plans

This topic has 5 replies, 5 voices, and was last updated 1 April 2026 at 06:52 by JasonB.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
31 March 2026 at 16:17 #842651
Philip Major
Participant
@philipmajor52482
Hi All. I have managed to obtain the castings for a Stuart 800 1/4 hp gas engine, but not paperwork or plans,!

Does any one have a set or know where I might obtain them. The videos on YouTube make it look both interesting and challenging

Mant thanks Philip
Advert

31 March 2026 at 17:34 #842670
noel shelley
Participant
@noelshelley55608
Try Stuart Models down at Bridport. Good luck. Noel.
31 March 2026 at 18:05 #842674
JasonB
Moderator
@jasonb
Don’t think they have much in the way of the old IC engine stuff from what I have read of others trying to get hold of similar.
31 March 2026 at 18:34 #842680
Bazyle
Participant
@bazyle
Since there are quite a few videos, pictures and other forum mentions you might need to systematically contact these people as even if made 20 years ago they may still have the plans.
31 March 2026 at 22:31 #842729
Michael Gilligan
Participant
@michaelgilligan61133
I don’t do Facebook, but you may find this of interest !

https://www.facebook.com/groups/56806961770/posts/10161716659011771/

MichaelG.
1 April 2026 at 06:52 #842744
JasonB
Moderator
@jasonb
Also keep an eye out at the top of the page for any personal messages as I think the system is not sending out notifications just incase someone may be able to help.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Angled d-bit / machinist reamer?
  Started by: Fulmen in: Workshop Tools and Tooling
- 8
- 16
- 15 October 2026 at 06:08
  Tendor
- Lathe arriving – source some practice materials 1 2
  Started by: starjump in: Beginners questions
- 17
- 33
- 14 October 2026 at 23:05
  southernchap
- Lathe turning tool nomenclature
  Started by: JA in: Workshop Tools and Tooling
- 9
- 15
- 14 October 2026 at 22:11
  Fulmen
- Printed circuit boards
  Started by: duncan webster 1 in: Electronics in the Workshop
- 7
- 15
- 14 October 2026 at 21:33
  duncan webster 1
- Greenbat 3 ton battery loco
  Started by: Pippin in: Work In Progress and completed items
- 2
- 2
- 14 October 2026 at 21:25
  duncan webster 1
- CAST IRON JOINING
  Started by: ian Holdsworth in: Beginners questions
- 5
- 5
- 14 October 2026 at 21:20
  Trevor Drabble 1
- Does anyone have any info about these vices
  Started by: bjcolyer in: Introduce Yourself – New members start here!
- 6
- 10
- 14 October 2026 at 19:04
  Nicholas Farr
- Searching for roller chain with pitch 2.5 mm
  Started by: Werner Habbel in: Hints And Tips for model engineers
- 3
- 4
- 14 October 2026 at 18:32
  Werner Habbel
- What Are the Most Practical Ways to Make Manufacturing More Sustainable?
  Started by: andrew998 in: Workshop Techniques
- 6
- 6
- 14 October 2026 at 16:41
  ega
- Home workshop site down?
  Started by: Andrew Tinsley in: General Questions
- 4
- 5
- 14 October 2026 at 16:39
  Brian Baker 2
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 11
- 23
- 14 October 2026 at 16:16
  noel shelley
- Sealant for bolting a dome casting to a model boiler
  Started by: Greensands in: Hints And Tips for model engineers
- 6
- 7
- 14 October 2026 at 15:37
  Derek Drover
- Involute cutters
  Started by: michael howarth 1 in: General Questions
- 2
- 2
- 14 October 2026 at 14:59
  not done it yet
- Powerfeeders
  Started by: larry phelan 1 in: Help and Assistance! (Offered or Wanted)
- 8
- 17
- 14 October 2026 at 13:00
  duncan webster 1
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 6
- 11
- 14 October 2026 at 12:28
  Bob Wild
- Threading accuracy?
  Started by: Andrew Tinsley in: General Questions
- 11
- 11
- 14 October 2026 at 11:38
  Andrew Crow
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 24
- 14 October 2026 at 09:26
  noel shelley
- Farm Gate Lock.
  Started by: Grizzly bear in: The Tea Room
- 15
- 19
- 14 October 2026 at 09:10
  Nealeb
- Best approach to pip removal
  Started by: Bill Phinn in: Workshop Techniques
- 10
- 22
- 13 October 2026 at 21:11
  Bill Phinn
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 4
- 13
- 13 October 2026 at 20:40
  starjump
- Motorcycle Centre Stand Pivot
  Started by: COLIN MARTIN 2 in: Related Hobbies including Vehicle Restoration
- 8
- 17
- 13 October 2026 at 20:14
  COLIN MARTIN 2
- Those back-room boys have been busy
  Started by: Michael Gilligan in: The Tea Room
- 6
- 6
- 13 October 2026 at 17:55
  old mart
- Scroll Saw Blades for Steel 1 2
  Started by: James A in: Workshop Tools and Tooling
- 14
- 30
- 13 October 2026 at 17:08
  Emanuel Hernandez
- John Haining 2″ Ruston
  Started by: Pixel_Porpoise in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 13 October 2026 at 13:27
  Roderick Jenkins
- Octopus Heat Pump 1 2 … 4 5
  Started by: Michael Gilligan in: The Tea Room
- 25
- 119
- 13 October 2026 at 12:35
  Michael Gilligan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies