Stuart 800 gas engine plans

[Philip MajorParticipant @philipmajor52482]

Hi All. I have managed to obtain the castings for a Stuart 800 1/4 hp gas engine,  but not paperwork or plans,!

Does any one have a set or know where I might obtain them. The videos on YouTube make it look both interesting and challenging

Mant thanks Philip

[noel shelleyParticipant @noelshelley55608]

Try Stuart Models down at Bridport. Good luck.  Noel.

[JasonBModerator @jasonb]

Don’t think they have much in the way of the old IC engine stuff from what I have read of others trying to get hold of similar.

[BazyleParticipant @bazyle]

Since there are quite a few videos, pictures and other forum mentions you might need to systematically contact these people as even if made 20 years ago they may still have the plans.

[Michael GilliganParticipant @michaelgilligan61133]

I don’t do Facebook, but you may find this of interest !

https://www.facebook.com/groups/56806961770/posts/10161716659011771/

 

MichaelG.

[JasonBModerator @jasonb]

Also keep an eye out at the top of the page for any personal messages as I think the system is not sending out notifications just incase someone may be able to help.

[Author]

Posts