Which wire goes where.

Which wire goes where.

This topic has 3 replies, 2 voices, and was last updated 9 May 2020 at 12:10 by ANDY CAWLEY.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
8 May 2020 at 07:17 #33586
ANDY CAWLEY
Participant
@andycawley24921
Advert

8 May 2020 at 07:17 #469979
ANDY CAWLEY
Participant
@andycawley24921
I bought this motor some time ago with the idea of powering a spit roaster. My problem is that there are four wires and I don’t have a clue how to wire the motor up also should there be a capacitor involved somewhere.

Is there anybody out there who can advise?
8 May 2020 at 08:52 #469995
AdrianR
Participant
@adrianr18614
If you look close at this **LINK**

The capacitor is across the red/brown and the mains would be on the brow/blue

From the name plate you need a 5uF capacitor like this **LINK**

I cant quite see the wire ends, but they look like they have spade ends, if so you may be able to get a capacitor with the same size terminals.

Adrian
9 May 2020 at 12:10 #470342
ANDY CAWLEY
Participant
@andycawley24921
Adrian, thanks very much for the advice. I think I might even be able to locate the capacitor that must have been with it when I bought it🥴
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Lathe tool inserts
  Started by: Andy Brocklehurst in: Beginners questions
- 7
- 12
- 26 August 2025 at 13:46
  Clive Foster
- 3.5″ Derby 4F – First Loco Build
  Started by: mattleicester in: Locomotives
- 1
- 1
- 26 August 2025 at 13:18
  mattleicester
- 3″ Castings – Help/Advice needed
  Started by: Andy Porter 1 in: Traction engines
- 5
- 11
- 26 August 2025 at 12:37
  parovoz
- Hereward
  Started by: Richard Simpson in: Model Boats
- 4
- 8
- 26 August 2025 at 12:27
  AStroud
- Softening epoxy 1 2
  Started by: John Haine in: General Questions
- 21
- 34
- 26 August 2025 at 11:20
  John Haine
- Myford VMB mill, head lift.
  Started by: lctikka61 in: Manual machine tools
- 2
- 2
- 26 August 2025 at 10:39
  John Haine
- QCTP for chester lathe 1 2
  Started by: Chris12 in: Beginners questions
- 11
- 27
- 26 August 2025 at 10:17
  dk0
- Granville lathe leadscrew change wheel
  Started by: JACK SIDEBOTHAM in: Help and Assistance! (Offered or Wanted)
- 11
- 18
- 26 August 2025 at 10:05
  Graham Flavell
- Valve gear problem
  Started by: John Billard 1 in: Locomotives
- 3
- 3
- 26 August 2025 at 09:08
  Charles Lamont
- Recommendations for book on clock repairs
  Started by: Andy Stopford in: Clocks and Scientific Instruments
- 8
- 10
- 25 August 2025 at 21:15
  Andy Stopford
- What Did You Do Today 2025 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 35
- 228
- 25 August 2025 at 17:30
  Roderick Jenkins
- Drain Cock search
  Started by: Speedy Builder5 in: Locomotives
- 4
- 8
- 25 August 2025 at 16:48
  Diogenes
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 11
- 14
- 25 August 2025 at 16:06
  Pete
- Blackgates 3 Way Toolpost Casting
  Started by: John McCulla in: Materials
- 15
- 25
- 25 August 2025 at 16:06
  Nicholas Farr
- Smart & Brown Model L lathe help required
  Started by: AJAX in: Manual machine tools
- 3
- 7
- 25 August 2025 at 15:14
  old mart
- Quartz clock movement
  Started by: duncan webster 1 in: Electronics in the Workshop
- 4
- 6
- 25 August 2025 at 10:24
  Michael Gilligan
- Milling for beginners book, Where?
  Started by: andy198712 in: Beginners questions
- 8
- 15
- 25 August 2025 at 09:16
  andy198712
- Museum donation
  Started by: Stephen Wessel 1 in: Introduce Yourself – New members start here!
- 3
- 3
- 25 August 2025 at 06:54
  Diogenes
- Phone Phreaking
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 11
- 15
- 24 August 2025 at 23:20
  Chris Crew
- THE MAUDSLAY TABELE ENGINE
  Started by: sivtek1 in: Stationary engines
- 4
- 7
- 24 August 2025 at 20:27
  Michael Gilligan
- Progress no.1 restoration
  Started by: flyingsailor in: Workshop Tools and Tooling
- 9
- 12
- 24 August 2025 at 19:52
  duncan webster 1
- A4 stainless
  Started by: David Ambrose in: Materials
- 14
- 22
- 24 August 2025 at 19:15
  old mart
- Joined 24 August 2025
  Started by: simon912 in: Introduce Yourself – New members start here!
- 3
- 3
- 24 August 2025 at 18:59
  noel shelley
- The stand alone weight for tower clock 1 2
  Started by: dk0 in: Clocks and Scientific Instruments
- 12
- 38
- 24 August 2025 at 18:33
  bernard towers
- Denford Orac refit
  Started by: Richard Evans 2 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 5
- 24 August 2025 at 16:59
  Richard Evans 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies