stuart 10v

stuart 10v

This topic has 4 replies, 3 voices, and was last updated 22 January 2016 at 15:31 by here again.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
22 January 2016 at 12:41 #222113
here again
Participant
@hereagain
Having bought a beautifully machined 10v bottom end I bought ‘Building a vertical steam engine ‘book but find page 22 cylinder drawing is missing dimensions..I wonder if anyone could send me a copy when youget a minute please..Thank you.Jonathon
Advert

22 January 2016 at 12:41 #32633
here again
Participant
@hereagain
drawings
22 January 2016 at 13:34 #222119
Neil Wyatt
Moderator
@neilwyatt
Do you mean the port dimensions? They are cast in so they aren't on the drawing.

The critical dimensions are (I think):

steam ports – 3/32"

Land between ports 5/64"

Exhaust port – 1/8"

IIRC port width is about 1/4"

Neil
22 January 2016 at 13:43 #222121
mechman48
Participant
@mechman48
Hi Johnathan

Here's a scan from my S10 kit hope it helps…

George.
22 January 2016 at 15:31 #222130
here again
Participant
@hereagain
Thank you very much both..I did nt get a cylinder with it..I ll use some gunmetal I have..
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Motorcycle Centre Stand Pivot
  Started by: COLIN MARTIN 2 in: Related Hobbies including Vehicle Restoration
- 6
- 8
- 9 October 2026 at 23:30
  peak4
- Dore Boring Bar set
  Started by: Andrew Tinsley in: General Questions
- 6
- 8
- 9 October 2026 at 22:10
  bernard towers
- Myford ML4 Identification
  Started by: Steven Volz in: Manual machine tools
- 5
- 7
- 9 October 2026 at 21:58
  bernard towers
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 53
- 206
- 9 October 2026 at 21:51
  Nigel Graham 2
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 8
- 19
- 9 October 2026 at 20:59
  Grindstone Cowboy
- Water tank sealing
  Started by: Garry Coles in: General Questions
- 3
- 4
- 9 October 2026 at 20:12
  noel shelley
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 657
- 9 October 2026 at 20:09
  Turbine Guy
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 2
- 5
- 9 October 2026 at 19:48
  JasonB
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 9
- 19
- 9 October 2026 at 19:28
  Robert Atkinson 2
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 8
- 25
- 9 October 2026 at 18:58
  blowlamp
- The lazy man’s fly cutter
  Started by: Sonic Escape in: Workshop Tools and Tooling
- 9
- 13
- 9 October 2026 at 17:29
  old mart
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 2
- 6
- 9 October 2026 at 16:17
  John Haine
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 4
- 7
- 9 October 2026 at 10:55
  starjump
- Silver solder.
  Started by: Michael Callaghan in: General Questions
- 9
- 13
- 9 October 2026 at 10:47
  Dave S
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 11
- 9 October 2026 at 10:29
  Andy Stopford
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 19
- 23
- 9 October 2026 at 00:49
  Nigel Graham 2
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 20
- 54
- 9 October 2026 at 00:33
  Nigel Graham 2
- Triangular Insert Tool
  Started by: James A in: Workshop Tools and Tooling
- 10
- 15
- 8 October 2026 at 22:48
  Bill Phinn
- Angled d-bit / machinist reamer?
  Started by: Fulmen in: Workshop Tools and Tooling
- 6
- 10
- 8 October 2026 at 22:41
  Bazyle
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 5
- 7
- 8 October 2026 at 20:04
  Bazyle
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 3
- 3
- 8 October 2026 at 19:34
  not done it yet
- Gears
  Started by: Franco Convertini in: General Questions
- 8
- 13
- 8 October 2026 at 19:07
  Howard Lewis
- Hello Everyone (New Member Introduction)
  Started by: cedricvale in: Introduce Yourself – New members start here!
- 5
- 5
- 8 October 2026 at 18:47
  Howard Lewis
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 4
- 4
- 8 October 2026 at 18:43
  Howard Lewis
- Canterbury lamb
  Started by: Michael Callaghan in: General Questions
- 3
- 3
- 8 October 2026 at 17:55
  noel shelley

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies