Ship Building

Ship Building

Home Forums General Questions Ship Building

Viewing 18 posts - 1 through 18 (of 18 total)
  • Author
    Posts
  • #23886
    Speedy Builder5
    Participant
      @speedybuilder5

      How do they do that?

      #189999
      Speedy Builder5
      Participant
        @speedybuilder5

        How do they do that? Big ships are built on a slipway, at an angle? So how do they get all the cabin doors vertical when the keel etc is tilting downhill.

        BobH

        #190003
        Bob Brown 1
        Participant
          @bobbrown1

          It's not the same as hanging a door in a house, and a lot of the fitting out is done once the ship is launched. Doubt you will see a spirit level used on a ship as the dam bubble would never stay still.

          Bob

          #190004
          Steven Greenhough
          Participant
            @stevengreenhough56335

            It’s what the tilt in the earth’s axis is for… the angle of a slipway matches it and the ship is in effect built straight up… honest.

            #190005
            Neil Wyatt
            Moderator
              @neilwyatt

              They have spirit levels with angled bubbles and squares that are set to the angle of the slipway. The workers can be sacked for bringing a conventional level or a plumbline onto the shipyard.

              Neil

              #190006
              Steven Greenhough
              Participant
                @stevengreenhough56335

                And all the spirit levels are calibrated to the slipway angle although of course if you hold the level the wrong way everything is off by twice the angle of the slipway in the opposite direction… or something…

                #190007
                Steven Greenhough
                Participant
                  @stevengreenhough56335

                  Ahh Neil you beat me too it.

                  #190011
                  jason udall
                  Participant
                    @jasonudall57142

                    All the above might be so.
                    But I would expect the keel to be laid horizontal ( neglecting any rise on said keel) building such chocks as required to match the slip.
                    This would allow the ship to be built square .
                    The thought of building a ship at such an angle looks to me to be wasteful and unnecessary.
                    .
                    Maybe look at video of ship lanches..and judge for yourself.

                    #190032
                    Saxalby
                    Participant
                      @saxalby

                      Neil had the right idea.Level.jpg

                      #190038
                      Speedy Builder5
                      Participant
                        @speedybuilder5

                        Checked out several launch videos – seems to me they do build on the slant.
                        Bob Brown, how did they get the bulkheads vertical ?
                        Steven G. – So do they have to push them down the slip – I think not.

                        Keep it coming BobH

                        #190043
                        Steven Greenhough
                        Participant
                          @stevengreenhough56335

                          ;P

                          #190045
                          Michael Gilligan
                          Participant
                            @michaelgilligan61133
                            Posted by Speedy Builder5 on 15/05/2015 20:17:06:

                            … how did they get the bulkheads vertical ?

                            .

                            Spirit Level on Angle Plate.

                            MichaelG.

                            #190046
                            Bob Brown 1
                            Participant
                              @bobbrown1

                              You do not need a spirit level to get things square…. 3 4 5, measure along the floor say 3 and up the bulkhead 4 measurement between the two points, hypotenuse is 5 simples.

                              In modern construction it is all built on the shop floor in modules and craned into position.

                              Bob

                              #190048
                              Martin W
                              Participant
                                @martinw

                                OOPS The spirit level is the wrong way round unless they going to smash the champagne onto the stern and launch bow first frown wink 2. Perhaps that's why some are launched sideways, no problem with bubbles then build level and heave ho off the edge.

                                Martin

                                #190051
                                Anonymous
                                  Posted by Bob Brown 1 on 15/05/2015 20:46:23:

                                  In modern construction it is all built on the shop floor in modules and craned into position.

                                  Bob

                                  A lot of modern ships are built in a dry dock or a floating dock; as Bob says pre-assembled modules are craned in, welded together and internal fitting proceeds as soon as some modules are in place. So by the time the ship is floated out, or off, it is ready for sea trials. The question of building on the slant doesn't arise.

                                  Andrew

                                  #190052
                                  Speedy Builder5
                                  Participant
                                    @speedybuilder5

                                    Saxlby – Was that an April 1st spirit level? or was it used to set up keel blocks ? Interesting picture.

                                    #190054
                                    Saxalby
                                    Participant
                                      @saxalby

                                      Yes an "April 1st" spirit level Speedy. Courtesy of Adobe.

                                      #190055
                                      Bob Brown 1
                                      Participant
                                        @bobbrown1

                                        Something like this.

                                        Dry docked there and they wanted to flood the dock to get a Tug out but we had no propshaft as they were working on the stern gland seal as duty officer had trouble explain but a trip down the dock and the hole where the prop should be said all.

                                         

                                        3-image.jpg

                                        Edited By Bob Brown 1 on 15/05/2015 22:06:22

                                      Viewing 18 posts - 1 through 18 (of 18 total)
                                      • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                                      Latest Replies

                                      Home Forums General Questions Topics

                                      Viewing 25 topics - 1 through 25 (of 25 total)
                                      Viewing 25 topics - 1 through 25 (of 25 total)

                                      View full reply list.