Ball turning adapter

Ball turning adapter

This topic has 3 replies, 3 voices, and was last updated 24 April 2015 at 16:31 by Neil Wyatt.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
24 April 2015 at 15:22 #187618
Jesse Hancock 1
Participant
@jessehancock1
I'm contemplating buying a ball turning adapter however I need information as to how small it can handle.

5mm 10mm 15mm??? It's nice to think that turning handles and knobs is now childs play but I haven't found any info on how small a ball or inside curve it will turn.

Has anyone on here bought one and experimented with it to find out it's full potential?

Meanwhile I'll try Googling the ether and see what turns up. (Oh the irony of it.)
Advert

24 April 2015 at 15:22 #23833
Jesse Hancock 1
Participant
@jessehancock1
24 April 2015 at 15:41 #187621
mick70
Participant
@mick70
bought the repton one from chronos only used it to make some 1/2" radius dies so far, but good bit of kit.

not sure how small it goes though.
24 April 2015 at 16:31 #187626
Neil Wyatt
Moderator
@neilwyatt
My guess is that outside diameters isn't an issue down to almost 0. Internal is a different matter and will mostly depend on the tool you use not fouling the work.

Neil
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- It’s A Compressor, Jim, But Not…
  Started by: Nigel Graham 2 in: General Questions
- 6
- 7
- 21 July 2026 at 21:43
  duncan webster 1
- Is anyone interested in developping a new series of model engines? 1 2
  Started by: [email protected] in: General Questions
- 16
- 43
- 21 July 2026 at 20:54
  [email protected]
- Using an emergency collet
  Started by: Dell in: Workshop Tools and Tooling
- 8
- 17
- 21 July 2026 at 15:13
  Dell
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 4
- 6
- 21 July 2026 at 13:18
  JasonB
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 12
- 21 July 2026 at 10:46
  duncan webster 1
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 6
- 10
- 21 July 2026 at 10:34
  Julie Ann
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 67
- 21 July 2026 at 02:01
  seemack
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 13
- 31
- 20 July 2026 at 23:54
  Bill Phinn
- Cormak TU2807v gearing issues
  Started by: paul_go in: General Questions
- 2
- 7
- 20 July 2026 at 21:14
  paul_go
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 37
- 20 July 2026 at 17:02
  ega
- Band saw 1 2 3 4
  Started by: Peter Simpson 3 in: Beginners questions
- 25
- 82
- 20 July 2026 at 16:55
  ega
- Gents C7 electric master clock
  Started by: Robert Atkinson 2 in: Clocks and Scientific Instruments
- 5
- 12
- 20 July 2026 at 16:44
  John Haine
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 7
- 17
- 20 July 2026 at 14:30
  Journeyman
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 67
- 20 July 2026 at 09:00
  dean clarke 2
- Steam Loco component interconnection diagram
  Started by: Trevor Wood 6 in: Beginners questions
- 5
- 8
- 19 July 2026 at 23:57
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 42
- 147
- 19 July 2026 at 15:48
  Speedy Builder5
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 9
- 19 July 2026 at 13:12
  Roderick Jenkins
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 4
- 5
- 19 July 2026 at 10:37
  renardiere7
- New comer
  Started by: vgvikram171 in: Introduce Yourself – New members start here!
- 1
- 1
- 18 July 2026 at 20:43
  vgvikram171
- Fixturing conundrum with Hemingway die filer kit
  Started by: timdotd in: Workshop Techniques
- 6
- 11
- 18 July 2026 at 18:52
  timdotd
- Use of insert type lathe tools 1 2
  Started by: JA in: Workshop Tools and Tooling
- 16
- 27
- 18 July 2026 at 18:39
  JA
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 26
- 81
- 18 July 2026 at 17:03
  Macolm
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 12
- 18 July 2026 at 16:56
  Steve101
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 10
- 14
- 18 July 2026 at 16:29
  Mark Rand
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 6
- 12
- 18 July 2026 at 14:52
  Zan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies