Tailstock drilling lever attachment

Tailstock drilling lever attachment

This topic has 3 replies, 3 voices, and was last updated 26 December 2017 at 12:15 by Mike Crossfield.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
26 December 2017 at 11:02 #333964
Steve Bower
Participant
@stevebower42241
Has anyone used/views on the RDG Tools tailstock drilling lever attachment for Myford lathes as on eBay? It seems significantly cheaper than the Myford one (when available). My main thought that since the lever gubbins was on the ‘work’ side of the tailstock, that it might lack in rigidity, but it’s not working very hard?
Advert

26 December 2017 at 11:02 #18784
Steve Bower
Participant
@stevebower42241
26 December 2017 at 11:28 #333971
Robert Butler
Participant
@robertbutler92161
Steve i have a genuine Myford lever feed tailstock attachment see my advertisement in the classified. It is for an ML7 not Super 7.Robert Butler
26 December 2017 at 12:15 #333975
Mike Crossfield
Participant
@mikecrossfield92481
Steve

I was put off buying one of these by the high prices, so I made one. Interesting little project. I don’t use it a lot, but when I need to drill very small holes, e.g. for clockmaking, the extra “feel” is invaluable. It only takes a few seconds to pop it into place, so much more convenient than swapping over to the standard Myford lever feed device (which I also have). I’ve never felt that lack of rigidity was an issue.

Mike
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Is anyone interested in developping a new series of model engines? 1 2 3
  Started by: paulmichael1084 in: General Questions
- 18
- 68
- 22 July 2026 at 22:26
  duncan webster 1
- It’s A Compressor, Jim, But Not…
  Started by: Nigel Graham 2 in: General Questions
- 10
- 20
- 22 July 2026 at 22:01
  bernard towers
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 43
- 150
- 22 July 2026 at 20:16
  Ian P
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 2
- 22 July 2026 at 18:56
  Peter Cook 6
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 21
- 22 July 2026 at 17:19
  Bazyle
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 2
- 2
- 22 July 2026 at 16:21
  Nick Hughes
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 72
- 22 July 2026 at 16:11
  tomcnc
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers
- Unusual Crawford Collets and where to test them
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 13:32
  Rainbows
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 8
- 22 July 2026 at 11:40
  bernard towers
- Panasonic Hard Disk Recorder
  Started by: Michael Gilligan in: Electronics in the Workshop
- 1
- 1
- 21 July 2026 at 22:48
  Michael Gilligan
- Using an emergency collet
  Started by: Dell in: Workshop Tools and Tooling
- 8
- 17
- 21 July 2026 at 15:13
  Dell
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 12
- 21 July 2026 at 10:46
  duncan webster 1
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 6
- 10
- 21 July 2026 at 10:34
  Julie Ann
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 13
- 31
- 20 July 2026 at 23:54
  Bill Phinn
- Cormak TU2807v gearing issues
  Started by: paul_go in: General Questions
- 2
- 7
- 20 July 2026 at 21:14
  paul_go
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 37
- 20 July 2026 at 17:02
  ega
- Band saw 1 2 3 4
  Started by: Peter Simpson 3 in: Beginners questions
- 25
- 82
- 20 July 2026 at 16:55
  ega
- Gents C7 electric master clock
  Started by: Robert Atkinson 2 in: Clocks and Scientific Instruments
- 5
- 12
- 20 July 2026 at 16:44
  John Haine
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 7
- 17
- 20 July 2026 at 14:30
  Journeyman
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 67
- 20 July 2026 at 09:00
  dean clarke 2
- Steam Loco component interconnection diagram
  Started by: Trevor Wood 6 in: Beginners questions
- 5
- 8
- 19 July 2026 at 23:57
  Nigel Graham 2
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 9
- 19 July 2026 at 13:12
  Roderick Jenkins
- New comer
  Started by: vgvikram171 in: Introduce Yourself – New members start here!
- 1
- 1
- 18 July 2026 at 20:43
  vgvikram171

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies