SSE20 – ER16 Indexa mini collet extension chuck

This topic has 2 replies, 1 voice, and was last updated 13 July 2015 at 22:17 by IanT.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
18 June 2015 at 18:50 #194046
IanT
Participant
@iant
I was lucky enough to acquire an SSE20 ER16 'Indexa' collet chuck a while back – which is very nicely (Swiss) made. However, my main intended use for it – is as part of a work holding/indexing device – rather than as a long reach milling chuck.

There is a screwed 'back-stop' inside the chuck – that can be screwed in and out quite freely but not (at least on my chuck) apparently removed. Used for work holding – this 'stop' is a problem – as it limits the length of material I can hold.

My question is this – does anyone know if these screw 'stops' are supposed to come out normally or are they retained in some way. Is my stop damaged or just 'as made' ?

I don't want to damage such a nice bit of tooling if it's supposed to be this way. Of course – getting the set screw out may be quite a problem anyway…

Regards,

IanT
Advert

18 June 2015 at 18:50 #17746
IanT
Participant
@iant
Is the ‘stop’ normally removable?
13 July 2015 at 22:17 #196677
IanT
Participant
@iant
BTW – The stops do come out and mine did (eventually)

IanT
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 9
- 16
- 10 July 2026 at 23:12
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 134
- 10 July 2026 at 22:48
  Nigel Graham 2
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 10
- 10 July 2026 at 21:38
  Russell Eberhardt
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 5
- 10 July 2026 at 21:37
  old mart
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 5
- 5
- 10 July 2026 at 20:16
  Mark Rand
- Cotton-covered flex
  Started by: Kiwi Bloke in: Materials
- 9
- 10
- 10 July 2026 at 20:03
  howardb
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 22
- 10 July 2026 at 19:39
  Clive Steer
- Farm Boy – Drawing 11
  Started by: Speedy Builder5 in: I/C Engines
- 4
- 4
- 10 July 2026 at 17:15
  John Purdy
- When is a new 90 degree drill not 90 degrees? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 21
- 49
- 10 July 2026 at 16:48
  Nicholas Farr
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 3
- 3
- 10 July 2026 at 15:07
  lukeama123
- BridgePort Interact 1 Mk2 parameters
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:31
  tomcnc
- Bridgeport Interact 1 Mark 2 circuit diagrams
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:16
  tomcnc
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 5
- 5
- 9 July 2026 at 20:27
  Wade Beatty
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 12
- 18
- 9 July 2026 at 19:08
  Michael Gilligan
- Transformer question
  Started by: Wade Beatty in: Electronics in the Workshop
- 3
- 5
- 9 July 2026 at 17:30
  Robert Atkinson 2
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 52
- 9 July 2026 at 12:47
  teamricky
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 66
- 9 July 2026 at 11:47
  KEITH BEAUMONT
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 11
- 8 July 2026 at 22:27
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 13
- 22
- 8 July 2026 at 10:48
  lucerne
- Flat Surface 1 2 3 4
  Started by: COLIN MARTIN 2 in: Materials
- 36
- 77
- 7 July 2026 at 23:34
  alecs
- Hello from new USA member
  Started by: grizmaster in: Introduce Yourself – New members start here!
- 3
- 3
- 7 July 2026 at 22:47
  noel shelley
- McLaren 1,5 inch scale Modl Traction Engine
  Started by: Mike Cooke in: General Questions
- 1
- 1
- 7 July 2026 at 20:08
  Mike Cooke
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 8
- 14
- 7 July 2026 at 19:29
  Speedy Builder5
- Readability / clarity in new combined magazine 1 2
  Started by: Trevor Gale in: Model Engineer & Workshop
- 19
- 35
- 7 July 2026 at 18:24
  JasonB
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 29
- 75
- 7 July 2026 at 14:02
  Bazyle

SSE20 – ER16 Indexa mini collet extension chuck

SSE20 – ER16 Indexa mini collet extension chuck

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies