Warco WM240

[bill MaskellParticipant @billmaskell10781]

Thread and feed table

[bill MaskellParticipant @billmaskell10781]

Hi all, Can anybody send me a copy of the thread and feed table for my Warco WM240 please.

Best wishes. Bill

[AndyfParticipant @andyf]

Hi Bill,

If yours has an imperial leadscrew and no-one comes up with anything better, go to LINK and click on the RH picture on the top row..

Andy

[1Participant @1]

Hi Bill

I have a PDF of a Thread and Feed Table for a WM 240 manufactured in Dec 2010. Unfortunately I don't know how to publish it on here but if you PM me I will send it by return.

Jim

[SpringbokParticipant @springbok]

Hi go to Grizzly.com and download the complete manual It never ceases to amaze me why Warco, Chesteter et all; who sell the same badged machines like grizzly do not write there own and just put in a chingalese version in the box.

Bob

[John Stevenson 1Participant @johnstevenson1]

Because Grizzly don't sell the WM240 model

[bill MaskellParticipant @billmaskell10781]

Hi Bob, Yes, John Stevenson is right, been on the Grizzly site several time to no avail. Looks like I might have to buy the operators manual from Warco if all else fails. Best wishes to all. Bill

[Author]

Posts