THE MAUDSLAY TABELE ENGINE

THE MAUDSLAY TABELE ENGINE

This topic has 6 replies, 4 voices, and was last updated 24 August 2025 at 20:27 by Michael Gilligan.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
24 August 2025 at 11:46 #813660
sivtek1
Participant
@sivtek1
i have lost the drawings and building instruction by A. R. Turpin of the Maudslay table engine published in the M.E.

Can anybody give me the yer of publication?

Thanks

Johannes Line
Advert

24 August 2025 at 12:01 #813662
Dick H
Participant
@dickh
From https://www.itech.net.au/modelengineer/
24 August 2025 at 12:44 #813669
Michael Gilligan
Participant
@michaelgilligan61133
This may be of interest, but I can’t be bothered jumping through all the Scribd hoops:

https://www.scribd.com/document/884676789/Model-Engineer-Vol-106-No-2662

MichaelG.
24 August 2025 at 14:23 #813677
bernard towers
Participant
@bernardtowers37738
Two identical topics???
24 August 2025 at 15:27 #813684
Michael Gilligan
Participant
@michaelgilligan61133
On 24 August 2025 at 14:23 bernard towers Said:

Two identical topics???

No … not identical

MichaelG.

.

Ref: https://www.model-engineer.co.uk/forums/topic/the-maudslay-tabele-engine/#post-813661
24 August 2025 at 18:36 #813727
bernard towers
Participant
@bernardtowers37738
Same question posted by same person!!!!!!!!!!!!!!!!!!!!
24 August 2025 at 20:27 #813753
Michael Gilligan
Participant
@michaelgilligan61133
It’s not really the pantomime season, Bernard … but I have to say:

Oh no it isn’t !

MichaelG.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 1
- 1
- 24 July 2026 at 09:38
  Pippin
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 16
- 22
- 24 July 2026 at 08:55
  Gerard O’Toole
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 53
- 24 July 2026 at 08:18
  David Frith
- Chat GPTgoes rogue and launches cyber attack
  Started by: Robert Atkinson 2 in: The Tea Room
- 8
- 9
- 24 July 2026 at 07:29
  Adrian R2
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 10
- 24 July 2026 at 06:50
  JasonB
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 69
- 24 July 2026 at 05:38
  Diogenes
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 1
- 1
- 24 July 2026 at 04:23
  Blue Heeler
- Workshop Heaven but must have cost a fortune.
  Started by: alan ord 2 in: Workshop Tools and Tooling
- 5
- 5
- 24 July 2026 at 02:19
  Bill Phinn
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 19
- 77
- 24 July 2026 at 01:23
  paulmichael1084
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 6
- 23 July 2026 at 22:13
  Michael Gilligan
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 152
- 23 July 2026 at 21:50
  Nigel Graham 2
- Mitutoyo Metrology Handbook – Still Available From Mitutoyo UK
  Started by: southernchap in: Books
- 3
- 6
- 23 July 2026 at 21:46
  Robert Atkinson 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 12
- 30
- 23 July 2026 at 21:17
  Nigel Graham 2
- Dart 7 1/4 Build
  Started by: Roy Birch in: Locomotives
- 1
- 1
- 23 July 2026 at 14:25
  Roy Birch
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 3
- 23 July 2026 at 13:16
  houstonceng
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 14
- 23 July 2026 at 10:28
  noel shelley
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 22
- 23 July 2026 at 02:10
  Grindstone Cowboy
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 76
- 23 July 2026 at 00:47
  seemack
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 3
- 3
- 22 July 2026 at 23:03
  paulmichael1084
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers
- Unusual Crawford Collets and where to test them
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 13:32
  Rainbows
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 8
- 22 July 2026 at 11:40
  bernard towers
- Panasonic Hard Disk Recorder
  Started by: Michael Gilligan in: Electronics in the Workshop
- 1
- 1
- 21 July 2026 at 22:48
  Michael Gilligan
- Using an emergency collet
  Started by: Dell in: Workshop Tools and Tooling
- 8
- 17
- 21 July 2026 at 15:13
  Dell

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies