Richard B’s Minnie.

Richard B’s Minnie.

Home › Forums › Traction engines › Richard B’s Minnie.

Viewing 26 post (of 26 total)
  • Author
    Posts
  • #873062
    Richard B
    Participant
      @richardb44403

      Thanks for the grate info, I’ll have a think about it – I rather like the flat plate option.

      Yes I fitted inner and outer spacers of 1.25 mm which gives lots of clearance now.

      Looking at the ash pan I think I’ve rather got it a bit wrong in length as the book mentions nice tight fit to the inner boiler wrapper, but no mention or GA/ section of the front.
      Mine is pretty much flush at the front so I think a bit short for the hinges ?

      Will have a think – may need to rivet / s/s a small extension to the front of the ash pan ! I so wish there were a few more assembly GA / sections !

      I think I just about have enough space for the gear rod but haven’t got there yet – may use a bit of hacksaw blade cut down as it’s pretty stiff.

      Thanks for the heads up though !

    Viewing 26 post (of 26 total)
    • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

    Latest Replies

    Home › Forums › Traction engines › Topics

    Viewing 25 topics - 1 through 25 (of 25 total)
    Viewing 25 topics - 1 through 25 (of 25 total)

    View full reply list.